Search results

I did search the site but all I found was info about jz swaps. My apologies.

This may be a dumb question, but will pre '89 motor mounts work on a post '89 setup? Thanks

Hmmm, not the info i was lookin for, but to each his own.

I know there have been 927 threads about people doing rebuilds and the questions surrounding said operation, but as I consider my options for my rebuild, I have a few questions I haven't found good answers to. I apologize if any or everybody is tired of reading this crap. Pistons: I found a...

Thanks for the info guys. -Ryan

I recently pulled the engine out of my car and am wondering if its a JDM or not. The metal coolant pipe that runs along the exhaust side of the block that goes to the heater core on the driver's side looks like it has been factory capped off. The previous owner had a hose running over the head...

All pictures are off the intake side, where the scoring was the worst. The scoring was also worse towards the front of the cams. -Ryan

Will hopefully have some pics up by tonight. -Ryan

My cam caps and journals feel pretty rough to the touch. I can see irregular scratches and scoring in them, and in a few places it looks like there are some metal deposits, shavings perhaps. Does this still sound normal? The camshafts turn ok, but I wonder if they are turning as easy as they...

I took my camshafts out today to find that the bearing caps and where the cams rest in the head were rough and scored up. The cams look ok, but the aluminum head and caps do not. For the recorded, the head is a remanufactured one that the previous owner had installed about 15,000 miles ago...

Ok, a while back I did a combustion leak test which came up positive. I don't think the leak was very bad because I wasn't having problems with coolant blowing out the overflow, steam out the exhaust, or "milkshake" oil. Also, when I did the leak test, it was slow in changing color...

935 IS one of our vendors.... I'm just curious if anyone has any other recommendations. -Ryan

I've looked around and the cheapest place I've found is 935 Motorsports @ $130 for 1.37MM 84MM. Anybody know of anywhere cheaper? Thanks -Ryan