Search results

Since my EGR has been removed, can I leave the VSV plug on the engine wiring harness unplugged?

I bought a new wiring harness and am putting it back into my car. I took some pictures of the 6 plugs I'm trying to identify from my cut JDM harness. (it's cut-off leading to the ecu plugs) My engine had a beat up harness on it previously and 4 of these plugs were missing. Out of the two that...

I am missing one of the studs that connects the lower intake manifold to the head. Where can I purchase new studs or bolts that would fit?

I'm currently restoring my engine wiring harness. I've looked through the forums and found this website: http://easternbeaver.com/Main/Elec__Products/Connectors/Sealed/SM-MT/sm-mt.html For my broken connectors I can buy the new ones from that site. I have a few connectors that are in good...

My accordian hose is beating up so time to buy a new one. I'm removing my AFM, so it would be nice to remove the restrictive stock accordian hose as well. The HPS silicone hose is the one I was interested in, but i've asked 5 vendors and HPS themselves is on backorder for 3 weeks. Has anyone...

I'm removing my engine wiring harness and the engine is still in the car. I've taken one off before, but the engine was on a stand. I've got all the clips undone, I just can't get it out from under the intake manifold. Is there a trick to do this, or am I going to have to remove the intake...

Toyota told me the gear for the CPS is obselete. Is there any place else that still sells this gear? If not is there a place that will just sell me the pin. I'm going to buy the o-ring, cover and gasket from toyota but really need that pin and gear.

I'm converting my 89 7M-GTE to work with a 86 non-turbo shell. I'm having problems with the gas, temperature, oil and tach gauges. I was wondering if anyone has done the resistor mod to the NA tach? it's listed on this page http://www.4cefed.com/conversion.html Here's the picture of it...

Im going to be doing a boost leak test on my car using the air compressor style DIY ones. I'm taking off the accordian hose, putting the boost leak tester on the turbo inlet. I've heard I need to plug off a hose by the throttle body. I just want to make sure I'm plugging off the right one. I...

So here's a link to the video of the car: Engine Running I'm assuming it's a vaccum leak, any input? Is it something that could damage my engine on a 3000km drive? Here's a list of things that have been replaced: intake manifold gasket was done rocker cover gasket fresh ct-26 turbo...

So I'm interested in buying a Supra. The engine has been rebuild 15k ago. I'm happy with everything except the engine has a problem. This is a quoted description from the owner. "Has a metal on metal piercing type squeal coming from "sounds like" along the fuel rail/intake manifold area...

So I took my motor in to get resurfaced. Stock HG is 1.37 mm and the HKS one I want to install is 2.0 mm. I asked the machinist to take off 0.315 mm from the head and 0.315 mm from the block. He told me that I should take off LESS from the head and MORE from the block or it will cause detonation...

I purchased a JDM 7M-GTE. It came with a cut wiring harness and I would like to identify the exact year so I can purchase a matching ecu and wiring harness. Also I'll need to buy a TSRM and TEWD and want to be sure what year it is. I've searched the forums and internet with no luck on a sure...