My Speedo works great! It is about 5-7 percent above what is says. So When i am going 60 on the speedo, it is really about 64. Never bothered me. I have 18" Rims and i never adjusted it when i went from Auto to manual.
Anyone have any ideas? I have a 2 week roadtrip that i will be driving about...
Hey,
I have had issues with the darn speed sensor for about a year now. It only acts up randomly, but really sucks on long trips. My car does have ABS installed, but because my tranny is JDM, i dont have the sensor in the tranny for the ABS to function.
Anyways, the cruise works fine sometimes...
I am planning on installing my HE351CW soon. Has anyone run one on a supra yet?
Mine was off of a 2007 dodge ram. It was just rebuilt, so it should be awesome. I am contemplating rebuilding the short block before i do the turbo swap because #5 cylinder has bad oil rings and is letting a little...
On the cruise control computer. There are 17 pins in all. 6 and 8 are for the AUTO tranny ecu. So for some reason, even though it is not in the car, it is giving an improper signal to the cruise control computer. If you remove the wire pins from the harness that is connected to the cruise...
PROBLEM SOLVED!!!! :
So if you have a car that was originally an AUTO, there is a pin 6 and 8 that will still be connected to the Cruise Control ECU. You must remove these two pins and then the car will work! OMG!!! 6 hours to figure this out. I have the feeling if i had searched the regular...
PROBLEM SOLVED!!!! :
So if you have a car that was originally an AUTO, there is a pin 6 and 8 that will still be connected to the Cruise Control ECU. They are suppose to be connected to the AUTO tranny ECU. That is gone now, so it screws up the cruise control ecu. Remove the 2 wiring pins from...
After 2 months i am still having the same problem. It is not fuel related at all. I removed all the fuel and refueled. I am wondering if anyone has had an issue with the ECU being too cold. I know it sounds strange, but i am running out of ideas. I replaced all of my spark plugs about 3 weeks...
If you read beyond the first few posts, Aaron and i figured out that the harness was incorrect. It was built for a 1jz vvti, this is why it doesnt work. I stilll need a few pictures of a good 1jz harness so i can rewire it properly. If anyone has a quality picture of each side, i would greatly...
My battery is fine except for the fact that i cant get my car to start. that causes me to kill it a few times a week. It will chug and chug for about 15 minutes in the cold, so the battery is definitely ok :)
Plugs are about a year old. Fuel filter has not been changed because it is in tank. I know having issues at 40 degrees is very silly and strange. That is why i am here asking questions.
But wouldn't you have other issues if the fuel pump was dying? My car runs perfect all day long every day except for the first start in a cold morning. It was in the 40s for 2 weeks, the last 2 weeks and i drove every day without any problems. We just got cold again and she stopped starting.
That is what i was thinking. We rarly dip down to the teens. This winter we have had a low of maybe 18. It has been really warm. Something else very strange is going on. A block heater might be a band aid, but it isnt going to fix the problem.
The pump does work fine any time the temp is over 40 degrees. It is only when it is colder then 34 that i run into issues. Would that sync with a bad fuel pump. If it is a bad pump, i am going to be so mad i just drained and refilled my tank :( I have 9 gallons to use up now.
Hey everyone,
OMG! I have had the worst winter with my supra. In November the supra wouldn't start on random mornings. I thought that i had let the fuel tank get too low and so it got a little condensation. So to fix it, i just started keeping my fuel tank above 1/2 mark all the time. Well, that...
When i have it done, definately, but i havent finished. The damn ignitor issue stopped me months ago and i have just been really busy since then. If my buddy and i get back on it, then i will send it. I am running MS2 with a 3.57 board.
TTFN
I have no experience with Microsquirt. So i cant tell you. Sorry.
I personally use a AVC-R for boost controlling. So i havent used that one that was shown. The unassembled kits are cool, it will take a while to put together.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.