Search results

As one game review put it, "this is a 10/10 racing simulator wrapped in a 5/10 game", which from what I've read sounds to be very accurate. As someone pointed already pointed out, the "track maker" feature is a big disappointment and it sounds like there are a ton of things outside of the actual...

Have you had the car aligned? The toe could be out of spec.

If I remember correctly, Marlin crawler does still sell the washer, but they believe that they bearing plate is ultimately the main problem.

CLP type lubes definitely do dry out after a while, I actually use Redline since I've got it laying around and it works very well.

Yeah 4" is terrible as far as clearance goes, 3" is probably fine if you're going to stay with the ct-26.

Regardless of where you get the thrust washer from, be sure to get the bearing plate that marlin crawler sells as that's supposed to be as much the culprit of thrust washer failure as the washer itself.

Do XDs have polygonal rifling? Most of the time that's the reason that straight lead isn't recommended. If it's standard rifling there really shouldn't be any risk.

I don't know anything about the xps you're referring to, but usually there is a specific form factor that components such as the motherboard are made for. In most cases it is ATX, and I think there are other variations such as ATX-mini, etc. If the Dell uses the same form factor it should bolt...

Are you guys all running cars on the track? If your cooling system is fine then there's not really any reason that you need to use WW. Cooler temp does not equal better running, if that was the case people would just run without a thermostat. If your car is already overheating than there is some...

I don't think Do-luck makes those pieces any more. Also JIC used to make the front upper-A arms for camber but I think those were discontinued as well. I believe that Beech Performance on this forum makes adjustable lower arms.

Wasn't there some concept vehicle a while back which was basically a viper engine with 4 wheels stuck on it and it was supposed to be a "performance bike"?

Apparently the new release is 11/24 edit: I just got an email from Sony so 11/24 is official

I think it's funny how if this thread were about copied ebay parts it, everybody would be talking about "shitty china parts" and "copied garbage" and how buying those parts undercuts the legitimate makers who design their parts. But when it comes to copied video games? Everythings A-ok there...

As far as I have seen, most makers have a specific hub adapter that you then bolt a universal QR assembly to. I know there are the universal ones that you can weld to the steering shaft and such, but I have yet to see a one-piece bolt-in which serves as the hub adapter and quick release.

NRG makes one, apparently the mk3 hub is different and has a specific part # which is not the one that is used for most of the Toyota hubs. I want to say it is SRK-121H...

Corvette rear, R34 front end? Needs to get a euro engine in there to mix it up.

Can you explain what you mean by the shocks having too much travel? From what another person said, the shocks had too little travel which caused bottoming out issues with lowered cars.

That's not the place that I purchased it from, but that is the same size fitting ends that I purchased.

I've heard a lot of good things about the direzzas. There's also a new Azeni tire now, the RT-615K, apparently it's supposed to be better in the wet.

I want to say that the maker is called ADR? Found this: http://www.tamparacing.com/forums/wheels-tires/252626-18x9-adr-version-ii-rims-brand-new.html