Search results

I have never run anything other than stock turbos and MBC's, but I am upgrading my 1JZ from the stock twins to a T04. Stockers were smoking right away :( EBC's sound good on paper. I was just wondering if a EBC is really worth the money as far as performance goes? Setup: 1JZ T04 Stock...

I am getting a pretty decent puff of white smoke as the engine is spinning down. Whether its in between shifting, just free revving and letting off the gas, or down shifting. The car is a BPU 1JZ with 2JZ PCV valve. I have a feeling what it is(or they are as the case may be), but I figure...

A fair amount of oil dumped out of my tranny when I was putting my engine back in. Which plug is the oil-level bolt? I thought it was the large bolt, 1/2 way up the tranny, near where the tranny mounts to the body. But, that bolt is Super tight. I wasn't sure, so I wanted to check before I...

Where is the plug for the back-up lights? I have a connector hanging off my R154, but I don't know where it goes.

I can't get my BOV to make much of a sound :( My setup is: 1JZ at stock boost BOV is about 8" from the TB and vented to atmosphere Vacuum line is hooked up to the intake manifold The BOV came with the car, but it wasn't installed. The adjustment screw was all the way off. So I put the...

I bought my supra about 2 month's ago. The 7m-ge was gone and a 1jz ready to go in. I got the car for really cheap, but ever since I bought the car these mexi-chrome rims have been a pain to my eye every time I look at my supra. So last night, I spent about 6 hours and 5 dollars on them. I...

I am going to swap over to a 2JZ water pump on my 1jz.It would be nice to get it all done in one sitting. I don't like getting 1/2 done and realize I need something else to finish. I know the timing belt and tensioner have to come off. Is it possible to leave the crank pulley on? I don't...

I finally found a 1JZ ECU! JDMtiger guys are sending me one. Anyways, I was on the phone with him and he asked if I wanted to do overnight shipping. I Immediately thought of Fast and the Furious about the "Over night parts from Japan" comment. I declined and went with UPS, but I kinda wished...

I think one of the motors in my seat is bad... When I try to move my seat forward or back, only one side goes forward a little and then it binds up. The cloth is in good condition though. Has anyone ever repaired this type of thing? I took a quick look at the bottom of the seat and I didn't...

I was trying to track down code 47 and this is what I see when I open my ECU... Can someone please pop their ECU open and take some pics, let me know where I can re-attach these leads to the corresponding pins.

I am trying to fix code 41 and 47 on my 1JZ. They are both TPS codes. I would like to check the voltages at the ECU pins to verify the wiring, what should my readings be? I think the 4 pins are VTA1 VTA2 IDL1 and IDL2 right?

Currently the engine is cranking, but not starting. The 2 codes are: 41 and 47 Are the codes the same as the 7m ones? If so I don't see 47 listed.

This is a long one, but It may hopefully it will give me piece of mind as well as anyone else who is concerned for left over wires. I have the majority of the wires spiced, but there are a fair amount of wires that aren't connected to anything. I would love for anyone to look over my list and...

I am wiring up the body harness connectors and I have a couple questions. Heres a quick run down of my car. 87' chassis that had a 7m-ge 5spd 1JZ engine swap and majority of parts were bought with the car, but nothing had been done. All of the ECU plugs were present, but the body plugs...

Does anyone have a part number of a belt they use after removing the AC compressor? If not I will just measure and go buy one thats close, but the parts store is about 15 minutes from me. I would like to avoid the hassle of test fitting and returning if possible.

I am doing a R154 swap into a 87 NA chassis. Will the speedo gear work out of the W58?

I am getting back into the supra community after being away for a couple years. Here is the car I got: 87' NA chassis 1JZ motor sitting in it(no mounts) R154 New radiator New IC pipes with greddy BOV New intercooler all for $1500 I am really excited to get some BIC mounts and tranny...

Here is my situation. I found rims in the garage when my parents bought this house in Wisconsin. I have a supra at college in Texas. I would love to fit these rims on the supra, but I don't want to go through the trouble of shipping them if they won't fit. I read on here supra's lug spacing is...

I am thinking about buying this supra. It is mid 1JZ swap. It is a friends, but the car is 1000 miles away. I would get it cheap, this picture is my biggest fear. What do these wires go to? More importantly, If i had a 7m-GE harness could I use its connectors to where ever these wires go...