Search results

I decided to get some of the Sylvania Silverstar sealed beams today and I thought I'd do some comparison pics. They were only $20 each. So, I figured why not. The stock ones that were in my car were looking pretty bad. I'm going to get the Hella ECE H4 conversions eventually. I just don't...

Let's see them!!! This is the tattoo that I got recently in Hawaii. It's still healing and I need to get some touch up done on it eventually. This is the starting point of my sleeve. I have 4 more, but this is my favorite now.

I've done some searching on here and SF and I just want to hear from the guys that put the stock 2jz cams into the 1jz. So far I know that some of the cam has to be machined to fit into the 1jz. I'm trying to find out some dyno numbers (butt dyno's would be useful as well) to see if it's worth...

I'm about to get my car registered in VA since I'm a resident there being military and not having NJ registration. Couple questions about the inspection requirements. 1. I have a small rock chip on my windshield. It's about 3/8'' wide. Will that fail? 2. I made my own 3'' exhaust and I...

I'm going to buy some coilovers with my insurance money and don't know which ones to get. I've have the Tein SS on 00' accord and love them. This is going to a daily driver btw. I'm trying to conserve money if possible so I can buy other goodies including a paint job for the supra. But...

Cliffs: Guy pulled out and hit the side of my car. Wheel, fender, door, piece in front of rear wheel got jacked up. It was his fault and I'm going to get the money to fix my shit. Yup, that's right. And I just got it finished up just this past sunday. So, here's what happened...I was...

If you saw my other thread about my gauge reading high, you'll know that I need to use the sensor that came with my gauge. With that being said, where is the best place to put the sensor on the 1jz? I appreciate you taking the time to read this.

I just installed an aftermarket water temp gauge and it seems like it is too high. What is the normal operating temp in degrees? Before I took out the stock one, the temp was a hair below the middle of the gauge. So, it was normal. I looked in the TSRM and couldn't find a definite answer...

I went to the Airshow Expo today here at McGuire AFB. I took a lot of pictures and thought I would share some of them. They were taken with with a Kodak Z710 and no photoshop. I was pretty happy with the way they came out. Enjoy F-117 B-52, C-5, C-17, KC-10, KC-135 B-52...

So, me and the wife made the longest trip so far with the 1jz swap to walmart (20 miles each way) last night and noticed my exhaust is pretty loud at cruising speed. I know it's going to be kinda loud at WOT, but is there a quality universal 3'' round type muffler that would be a little more...

UPDATED: Added pictures of the plugs. First off, I'd like to say that Odomd did all the figuring out of the wiring. With his permission, I'm posting the instructions for those that happen to get a soarer 1jz and want to put into a MA70. I used the instructions and mine runs now with no...

I'm just finishing up my 1jz swap and I'm not getting any power to my fuel pump. We hooked everything up right. Or at least we think we did. The engine cranks, but no fuel obviously. I'm using the soarer 1jz and my friend with the same soarer 1jz swap has his wired exactly the same and his...

I did a lot of searching and couldn't find a direct answer. Here's my situation...I put a soarer 1jz with the A/T ECU in my 1991 turbo with the R154. Everything is wired right (odom helped me and he did the same wires and his is running). The car is getting power and everything. But...

Ok guys, I'm back now from my deployment and have been busy already this week getting the swap done. Here's the skinny on me and the supra...I'm Andrew, in the Air Force, 25 years old, and my build is on a 1990 Supra Targa. Enough of the blah blah, here's the pics which you guys want...

Check this out. Just thought it was pretty funny. http://www.t6p.com/forums/showthread.php?t=15829

Thought I would tell you guys I'm back from my deployment a little early. Had a family emergency and might be flying to Arkansas tomorrow. It was two 8 hours flights in about 24 hours to get back to the states. But, I'm back now and get to work in the supra finally. Build thread coming soon...

I was just dinking around on ebay and saw this picture. Says V6 on the cam gear cover (i'm not retarded and know it's an I-6). Mine doesn't say that. Anyone else? Hope this isn't a repost (probably is though with my luck). If it is, please delete it.

Thought that I would start one of these up. Did a search and didn't see one yet. There's been a couple random motorcycle threads lately and got me thinking of how many supra owners/enthusists also own bikes. Here's what I have. EDIT: Updated Pics First is my old 00' ZX6R, 2nd 06'...

So, I've been looking around for some performance rotors and pads for my 91' turbo. I'm somewhat on a budget but I don't want to go to cheap and get crap. Do any of you guys know a good place to get some either slotted, drilled, or slotted/drilled? Also, what do you recommend out of the 3 of...

I've been thinking about getting one from Suprasport.com. Would it be a good investment and what kind of difference it will make? I already have a lightweight flywheel from 935motorports and a stage 3 clutch. Thanks for any info.