Search results

Well guys, i took both of my heads into class to perform practice valvejobs on, and as i was cutting seats i noticed a significant difference between the two. One head has a radiused seperater that divides the two intake valves on each intake port. As for the other head, the divider is set...

Hey guys, i just measured out my crank and im having a hard selecting which Toyota bearing sizes i should get. It seems like they(toyota) could get the numbers mixed up b/c if im not mistaking they have 9 different "standard" sizes, two of which are the size "2", three of which are the size "3"...

Ok guys, now that i have most of my motor situation under control, im ready to choose which turbo ill be using after the motor is broken in. Im going to be using Masterpower either way, and before, i was leaning towards the T70, and now im having a hard time choosing that over their GT42. the...

Ok so the guy that was setting me up with a "good" machinist, with a torque plate is falling through in MI. I have been hunting for a decent machinist for a while now, and im getting pretty flustered. Is there a good machinist that can bore my block over with a torque plate, that is in OH, MI...

Can we use stock USDM 550cc MKIV injectors? Are they all sidefead?

Hey guys does anyone have a cam sheet for the 7.70/268Duration TED re-grinds? they advertise an up to 40HP gain with these, i just cant see that. Any experience with that profile, or any of their profiles would be greatly appreciated.

Ok guys, me and a friend started porting my head, and i was having a look-see at the combustion chamber and noticed the "squish pads". I sarted researching and this is a pretty good site that i came up with "Mal Link removed IJ" He has pictures of Bryan's(Slow66) head, so he must be a forum...

I was thinking about this on the ride home tonight, has anyone ever swapped over a MKIV 6Spd rear, and or axels into a MK3, kindof like how some of the 240SX guys swap to a 300ZX setup in the back? Also, has anyone on here had any experience using one of Autopower's roll bars/cage, seems like...

I just want a full raw answer as to how important they are, im possibly doing a CP piston build so .040 over is called for. How badly will not using a tourqe plate affect performance? im expecting 600HP out of this next motor, tops. O and are these torque plates made specificly for the 7M, and...

Hey guys i just wanted to get some advice as far as adjusting ignition timing, with me emanage blue. Im getting ready to install the harness that i built, and i also wanted to know who all was using this feature with the blue. The 16x16 ignition map, and the datalogging capabilities w/ the...

So guys when i get all of my bugs worked out, and the car is finally broken in, i plan on building the harness for my emanage blue, to take advantage of the "16x16 timing map". Figgie, dr.jones, how much control does this thing give me, and everyone who uses it?

Where are you, i know syris is on here... i have seen two or three rookies here on campus???

Hey guys im tring to find a place to shoot any of my guns in lima, OH. let me know if you come up with anythingthing.(im prety drunk ;) )

Ok, i have seen a few pictures, of a cluster floating around on here a few months ago, and all the gauges where autometer carbonfiber series. I want to do this SOOO f-ing badly, i am having a pile of trouble trying to retain the autometer boost, oil press., and water temp in the factory cluster...

Hey guys, i just want to know if anyone has an online source to get oil squirter bolts? The closest toyota dealership is an hour away. Also are the water pumps sold at Advance auto parts of good quality?

Hey guys, well today i cleaned my block and installed all of the core plugs. Do you need to use any type of sealer on the core plugs?

I have searched and cant find a define answer. Will a 28 inch E.T. street, fit under a stock suspension? What is the biggest tire you can fit under the stock suspension? Im getting ready to order some drag tires and Alumastars, and i just want to be 100% sure. sorry if this is a repost, but...

Well guys i was right about diagnosing my BHG. have a look at these pics, ever seen anything like it? It pulled the surfaces around the water jackets togather, on the exaust side and a few on the intake side....i have no idea how it kept running, or how it passed all of the compression tests i...

Ok guys, ive been searching for a while now and the only place that has given me a good answer is performance engineering in cleveland. are there ANY machine shops in VA or NC that can do a 50RA spec or lower???

I found this article as i was researching ring information. What are your opinions? http://www.mototuneusa.com/break_in_secrets.htm Thanks, Alex