Recent content by zokustyle

I recently bought a used OS Giken twin plate. It came with the supplied flywheel bolts, but my concern is whether they're reusable or not? Anyone else had experience with OS Giken bolts specifically?

Not as solid as aluminum. After having aluminum subframe bushings, I'll have it no other way. ***thirteen down, aluminum bushings: http://www.beechperformance.com/html/toyota_products.html

STANCE. Why would you settle for anything other than inverted monotube?

Could you post some pictures of how your car sits, and what your coils look like, at that ride height? IE, if your collars are maxed, you have the shock all the way up, whatever.

...on stock twins. mods are: driftmotion intake, 2.5 inch intercooler piping with a big front mount, blitz blowoff valve, stock y-pipe to an open 3 inch downpipe. the car revs in neutral to rev limit with no problems. But once I go for a real pull, at around 4-6 thousand, the engine dies for...

Fuel, air, and spark. Make sure you're getting them.

I heard after 14psi you're fucked.

Wish I would've known you could get them elsewhere. -_- but yeah, any NA JZ flywheel will work. SC300 is the same.

Any gauge. I just cut some off my old 7M harness.

It's on the back of your tach:

was the original engine a GE or GTE? if it was GE, you have to cut a resister and solder in a wire in place of it. If it was GTE, check your wiring.

I was kidding, matt. simmer. I'm gonna connect my PCV valve, put new coolant and oil in it, and see what happens.

It's not smoking and isn't overheating. I drained it of its oil and water, there's no mix. plus the block says JZ, not M, so I think the headgasket is fine. ;)

So I got to changing the oil in my 1J, and I drained the oil and checked the filter, which were both fine, just black since this was the first oil change I gave this engine since I bought it. I popped the oil cap to fill it back up, and there was foam all over the oil cap. It doesn't have...

better grammar would be a great help, too.... Are your plugs wet or dry? Check for voltage at the coilpacks and injectors.