Recent content by seoul4korea

I went with 2J cams as a budget cam when I was doing my valve stem seals. You can try and find a set that have already been machined OR get a set of USDM Non vvti cams and get them machined as already stated. The biggest benefit can be felt at higher RPM's, they really help to open it up and...

What would be the right way to route everything? I'm going to be running the driftmotion oil cooler kit and an oil relocation kit. So here is what I'm looking at: Thermostatic sandwich plate oil sensor Blox sandwich plate Oil filter relocation adapters -10 braided lines and fittings. DM oil...

Having served on 2 submarines and did 9 years on them that's a pretty cool spot.

Same here, the exact same story for me lol

You can call HKS and see if they have one. You can also do a search and see if they have one online. California has a list of approved numbers on a searchable website.

It was Aaron from Driftmotion

So I haven't posted on here in a bit... Currently in progress with doing a 1.5J swap.... I spun a bearing and smacked a spark plug. Got a hold of a 2005 IS300 block with a fantastic crank and a set of USDM set of GTE rods and pistons. More photos of the build coming up soon on my build page.

Love that Ken Gushi steering wheel!

Nice! My supra was in Corpus for years at my brothers house. If you ever run into any issues he might be able to help you out, he helped me do a lot of work on mine and is a certified Air Craft mechanic.

Please do

Do the tubes on the right hand side just pull out?

What water neck is that?

She's running good! Finally got her together

Get this new cam gear cover from AliExpress for $12.... It's a pretty nice piece of kit.

hahahah nice mate! You can push around 17 psi no problem with stock twins and OEM injectors (With some minor tuning). Anything after that is a bit of a risk (The ceramic turbine side will turn to dust at some point.) Other than that get some form of tuning device, eliminate Fuel Cut, get a...