Recent content by Quazaky

hey just finished my 7mgte Build for my 1990 mk3 supra made a YouTube video for anyone interested. https://www.youtube.com/watch?v=u4FWJHsnUtU

Just finished Up my 7mgte build for my 1990 mk3 link to the YouTube video below https://www.youtube.com/watch?v=u4FWJHsnUtU note *this post might be in the wrong section, if so admin can delete.*

ya cleaned it out a few times

honestly not sure iv tried 3 pumps form rock auto at 3 racks 2 solenoids nothing has worked,

please keep this thread updated i cannot for the life of me get my power steering working and am super interested in a manual rack

this the one you got? https://www.summitracing.com/int/search/product-line/wilwood-pinto-rack-and-pinions/universal/yes/steering-rack-type/manual

Im looking into this also so far i know if you disassemble the rack remove some seals and put some grease in your not fighting the fluid in the rack

is the stock injector resistor good enough?

got the v1 for a good price, so i wont need to wire in any other resistors? I haven't removed the stock one if there is one.

Im going to go get my car tuned next week i have lex afm rc550s and a aem v1 ecu, the rc550 are low impedence injectors and my research is showing me that i need to trick the aem ecu to think they are high impedance by adding resistors? CAN ANYONE shed some light on this? part numbers...

I am looking into buying some new rod and crank bearings for my 7mgte has anyone used KING rod and crank bearings? Toyota is asking over 300 for just crank bearings which is to much. what have you guys used what do you recommend

So was able to order a PS pump from Rockauto in the US and installed it annoying power steering sound went away, but still have ZERO assist in the power steering and no matter how much i bleed it it the reservoir still bubbles a lot and sounds like gargling. does this mean i also have to do a Rack?

hey guys really need some help i have a 1990 Toyota supra turbo and i need a power steering pump. Napa,Toyota dealerships and Toyota CANADA cant even figure out which pump is in my car. i need to know if it is a w/o Hydraulic Reaction Type Pump or w/ Hydraulic Reaction Type Pump.

return line is the smaller one right?

wheels can barely turn when they are on the ground so i had to bleed with it in the air. Akito both lines that go to the reservoir do not have kinks or abnormal bends also before Fluid went everywhere there was no leaks that i could see. One other thing came to mind the power steering system...