Greddy Type-S BOV Rec. Adapter

[George_Bonilla]

I've been searching all over the web trying to find a recirculation adapter for the Type-S bov but no luck. Greddy makes an adapter (seen in the picture) for the FV, RX, and RS but it doesn't fit.

I've contacted Greddy multiple times. Since they no longer make this bov they don't even respond to my emails and give me the run around on the phone.

Does anyone know where I can source an adapter or if someone can 3D print me an adapter.

Sent from my SM-G935T using Tapatalk

 

[plaaya69]

If you do not find your fitting you need, are you able to slide a hose over the end like this one?

https://www.google.com/search?safe=......0i24k1.0.yZnsPGwIK4A#imgrc=no2NNrm4pskNyM:

 

[George_Bonilla]

If you do not find your fitting you need, are you able to slide a hose over the end like this one?

https://www.google.com/search?safe=......0i24k1.0.yZnsPGwIK4A#imgrc=no2NNrm4pskNyM:

I wanted an adapter to have less reducers involved since the accordian hose is so small in comparison but it might be my only option. I'll start getting measurements tonight, thanks bro I appreciate the advice.

Sent from my SM-G935T using Tapatalk

 

[plaaya69]

No problem. I been checking myself here and I can't find anything either. I only am seeing those thread in adapters but they look too small like this one

http://www.ebay.com/itm/Recirculati...ash=item3aa1bd1ea4:g:ODoAAOSwBahU0o2i&vxp=mtr

 

[George_Bonilla]

No problem. I been checking myself here and I can't find anything either. I only am seeing those thread in adapters but they look too small like this one

http://www.ebay.com/itm/Recirculati...ash=item3aa1bd1ea4:g:ODoAAOSwBahU0o2i&vxp=mtr

That's the one I tried out. It looks small but it's actually to big to thread inside.

Sent from my SM-G935T using Tapatalk

 

[George_Bonilla]

No problem. I been checking myself here and I can't find anything either. I only am seeing those thread in adapters but they look too small like this one

http://www.ebay.com/itm/Recirculati...ash=item3aa1bd1ea4:g:ODoAAOSwBahU0o2i&vxp=mtr

Its raining so i couldnt go check for myself but after a lot of searching I found one mention of it. The recirculation hose size is 1 1/4" I.D.

Sent from my SM-G935T using Tapatalk