The story of my Supra....My 2JZA70 supra!
- Thread starter SupraClaou
- Start date
joeyd23;1307290 said:
What...does...that mean?:biglaugh:
New stuff are on the way....New Big brake kit & new bigger wider rims!
I'll keep you posted
When you get a chance you should take some more pictures of the diffusers and rear bumper I really like both.
rs4rush;1308574 said:
Will do :biglaugh:
Actualy the rear bumper is the stock one.
I have made a custom rear under spoiler.It is a combination of Bomex
rears and Regulus rear section. I have added a rear deffuser.
The rear deffuser is also a custom work from fiberglass and it is painted
black.
That's all :sarcasm:
I'll make some new photos of the rear section soon.
tekdeus;1311164 said:
Thanks! As a car (supra) is very very rare over here....:naughty:
I am glad and I feel very lucky to have one of these rare 'wheels' in
Europe.On the other hand I feel very alone,and sometime helpless:cry:
I do thank Supramania forum for bringing the Supra community close to
me...:love:
Last edited:
More pictures....
With the carbon hood,mirrors,rear wing,side diffusers :biglaugh:
The above picture was taken with the stock mirrors on...though.
The 17" Azev A rims have been sold. New rims..Same Azev A are on the way,
but widder and bigger ones :sarcasm:
Stay tuned :biglaugh:
With the carbon hood,mirrors,rear wing,side diffusers :biglaugh:
The above picture was taken with the stock mirrors on...though.
The 17" Azev A rims have been sold. New rims..Same Azev A are on the way,
but widder and bigger ones :sarcasm:
Stay tuned :biglaugh:
The 18" Azev rims have arrived finally after 3 months :love:
Front is 8.5" x 18" ET 20 with 235-40/18'' and rear is 10.5" x 18" ET 24
with 275-35/18" Dunlop Maxx asimetric tires.
I rolled the rear fenders and pulled them a little,so they won't rub :sarcasm:
Front are ok,no need to do anything!
Here are the new Azev type A rims:
Also,bought this nice gadget. A wireless module that measures the tire
pressure and temperature.Ready to be installed with the new tires/wheels!
Front is 8.5" x 18" ET 20 with 235-40/18'' and rear is 10.5" x 18" ET 24
with 275-35/18" Dunlop Maxx asimetric tires.
I rolled the rear fenders and pulled them a little,so they won't rub :sarcasm:
Front are ok,no need to do anything!
Here are the new Azev type A rims:
Also,bought this nice gadget. A wireless module that measures the tire
pressure and temperature.Ready to be installed with the new tires/wheels!
IJ.;1349843 said:
It uses wireless sensors. The valve attaches to the sensor inside the
rim. Send you some pictures...
They display tire pressure/temp in real time with an accuracy of - / + 1
psi or Farenheit. Nice gadget.You can set peak datas and warnings! It is important though to know exactly your tire pressure when doing high speeds (+150 mph) :biglaugh:
I also installed four sard vortex generators over the rear hatch window.
They look cool...JDM style :biglaugh::sarcasm::biglaugh:
RHDjapan.com says that these can lower the cd drag about 0.01 cd. Who knows?
Got also some carbon hood pins for the 'Stout' carbon hood
And I took off the side diffusers...sold them! They didn't go with the Bomex
side skirts.
They look cool...JDM style :biglaugh::sarcasm::biglaugh:
RHDjapan.com says that these can lower the cd drag about 0.01 cd. Who knows?
Got also some carbon hood pins for the 'Stout' carbon hood
And I took off the side diffusers...sold them! They didn't go with the Bomex
side skirts.
Yeah...You're right!
And I was thinking,I have new rims/tires...why did I get 2 stickers of lead on each rim?
Damn those sensors...:biglaugh::biglaugh::biglaugh:
And I was thinking,I have new rims/tires...why did I get 2 stickers of lead on each rim?
Damn those sensors...:biglaugh::biglaugh::biglaugh:
A few of the race teams here have had issues getting a balance using that sort of sensor, if it's an issue have the tire shop try the tire in a few different positions to get the minimal amount of weight added.
Exterior pics with the new 18" rims and the fat tires :biglaugh:
Also hood pins and sard vortex generators are on car right now...
Also hood pins and sard vortex generators are on car right now...
Last edited:
IJ.;1350163 said:pretty cool gadget
I will make a video of that thing...This thing is so sensitive,that needs some
time to read and diagnose the frequency of each sensor. They even have
FR left FR right and RR left RR right positions....:sarcasm:
Big brake kit arrived!
JGTC JDM 6 pot aluminum lightweight caliper and divided 355mm (14") slotted
32mm (1.25") width rotor. Put on a mk4 supra decal on them :sarcasm:
I like the oem stock looks :biglaugh::biglaugh::naughty:
Time to put these on...maybe tommorow!
JGTC JDM 6 pot aluminum lightweight caliper and divided 355mm (14") slotted
32mm (1.25") width rotor. Put on a mk4 supra decal on them :sarcasm:
I like the oem stock looks :biglaugh::biglaugh::naughty:
Time to put these on...maybe tommorow!