Recently purchased this '87 N/A with a dead engine from a friend. They said it had a slight knock.
Current Plans:
Plasti-Dip white for the time being
Black Interior. I will be painting/dying a lot of the parts and using black suede.
7mgte or 2jz swap. (Have a big decision here)
Set up for Auto-X and local twisty roads.
Lots of carbon fiber, though it will be painted
HID Retro-Fit.
Proper Tint
My main issue right now is the Engine. I was planning on rebuilding the N/A and running it while I built a 7mgte. The current engine is more than gone. It sounds like you are pounding a giant metal sheet with a sledge hammer.
I have two engines currently sourced:
A 7mgte that is torn apart and needs put back together. Though it is complete or a 2jzge VVT-i with no throttle body, alternator, or wiring harness. I am trying to decide which route to go down. Price will most likely be the deciding factor.
On to the Pictures:
Came with the car
Questions
Any Idea what these are for? Found them in the trunk:
Also where does this go?
The previous owner told me they kept going bad and to just leave it off, but I believe this may be the cause of the auto locks not working.
The light failure control module was also in the trunk for the same reason, and I think it might be the reason I only get high beams no matter what, and the high beam light in the gauge cluster does not light up.
Current Plans:
Plasti-Dip white for the time being
Black Interior. I will be painting/dying a lot of the parts and using black suede.
7mgte or 2jz swap. (Have a big decision here)
Set up for Auto-X and local twisty roads.
Lots of carbon fiber, though it will be painted
HID Retro-Fit.
Proper Tint
My main issue right now is the Engine. I was planning on rebuilding the N/A and running it while I built a 7mgte. The current engine is more than gone. It sounds like you are pounding a giant metal sheet with a sledge hammer.
I have two engines currently sourced:
A 7mgte that is torn apart and needs put back together. Though it is complete or a 2jzge VVT-i with no throttle body, alternator, or wiring harness. I am trying to decide which route to go down. Price will most likely be the deciding factor.
On to the Pictures:
![391685_10151240668676011_1428576555_n.jpg](http://sphotos-a.xx.fbcdn.net/hphotos-snc7/391685_10151240668676011_1428576555_n.jpg)
![304340_10151242118526011_1869455531_n.jpg](http://sphotos-a.xx.fbcdn.net/hphotos-ash4/304340_10151242118526011_1869455531_n.jpg)
![189205_10151242118816011_1274151309_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-snc6/189205_10151242118816011_1274151309_n.jpg)
![320331_10151242119491011_1207540818_n.jpg](http://sphotos-a.xx.fbcdn.net/hphotos-ash4/320331_10151242119491011_1207540818_n.jpg)
![199913_10151242133026011_541634167_n.jpg](http://sphotos-a.xx.fbcdn.net/hphotos-snc6/199913_10151242133026011_541634167_n.jpg)
![560597_10151242133296011_1852633273_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-ash3/560597_10151242133296011_1852633273_n.jpg)
![374539_10151242133526011_2011033830_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-ash4/374539_10151242133526011_2011033830_n.jpg)
![65539_10151242134086011_1197676072_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-ash3/65539_10151242134086011_1197676072_n.jpg)
![579827_10151242134461011_1546789702_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-ash3/579827_10151242134461011_1546789702_n.jpg)
Came with the car
Questions
Any Idea what these are for? Found them in the trunk:
![12675_10151242135101011_542704884_n.jpg](http://sphotos-a.xx.fbcdn.net/hphotos-prn1/12675_10151242135101011_542704884_n.jpg)
Also where does this go?
![46225_10151242135426011_532787830_n.jpg](http://sphotos-b.xx.fbcdn.net/hphotos-prn1/46225_10151242135426011_532787830_n.jpg)
The previous owner told me they kept going bad and to just leave it off, but I believe this may be the cause of the auto locks not working.
The light failure control module was also in the trunk for the same reason, and I think it might be the reason I only get high beams no matter what, and the high beam light in the gauge cluster does not light up.
Last edited: