So I finally hit the drag strip for the first time ever. I made the mistake of running on my dinky 215s on sawblades. My first run was 16.9 because I had no idea what I was doing. I launched at 4000rpm's and spun 1st and 2nd and then finally caught in 3rd. My next 3 runs were 14.1. I launched at 2500 which made me bog. I trapped 100mph all 3 runs but my 60ft was between 2.1-2.3
Here's my current setup-
Stock Motor
3in Custom Exhaust from the turbo back WITH a cat
K&N intake
SP61GT DBB@ 12psi
PWR Radiator
Blown front koni yellow struts
Rear koni yellows set to soft setting
Intrax Springs
ST Sway Bars
SPEC Lightweight flywheel
SPEC Pressure Plate
ACT 6 Puck Disc
I can't afford drag slicks right now, so the next best thing I have is a pair of rear mk4 supra wheels with khumo ecsta v700's in the size of 245/45/17
Can I get some tips on what to do from the experienced dragsters here?
What kind of times should I expect?
What rpm should I be launching at?
I will be heading to Infineon Raceway on wednesday for the wednesday night drags!
thanks in advance!
Here's my current setup-
Stock Motor
3in Custom Exhaust from the turbo back WITH a cat
K&N intake
SP61GT DBB@ 12psi
PWR Radiator
Blown front koni yellow struts
Rear koni yellows set to soft setting
Intrax Springs
ST Sway Bars
SPEC Lightweight flywheel
SPEC Pressure Plate
ACT 6 Puck Disc
I can't afford drag slicks right now, so the next best thing I have is a pair of rear mk4 supra wheels with khumo ecsta v700's in the size of 245/45/17
Can I get some tips on what to do from the experienced dragsters here?
What kind of times should I expect?
What rpm should I be launching at?
I will be heading to Infineon Raceway on wednesday for the wednesday night drags!
thanks in advance!