88 Supra - Project 1J

[OneJArpus]

Got into an accident on the 17th and haven't touched her since! Also lost my daily driver RIP Cavalier i'm glad your the only thing that died in that accident. Hopefully i'll have something to update in the next week or two.


I found a leaky injector, i'll be going with a GM Map sensor to avoid boost cut, i'll adjust the TPS, recheck wiring on the SAFC, get her aligned, and hopefully get her tuned.

 

[viper92086]

we need a meet!

 

[OneJArpus]

yea we do!! its been a very long time since i've been to a supra meet.

 

[OneJArpus]

MKIV TT INJECTORS - CLEAN FLOW TESTED

ALL PUMPING OUT 546 CC'S @ 43 PSI

Before and after is minimal these injectors were in great shape


removed ksports and installed tein ss w/pillow mounts

 

[OneJArpus]

Two months since last update

http://www.youtube.com/watch?v=8S-y__RP6eQ

 

[OneJArpus]

ran a total of 6 times this year

first 3 runs best run was 14.1 @ 104 with a massive sputtering issue for the supra meet

weight 3672 w/ 1/2 tank & me in it i'm about 230/40

test and tune yesterday first run was 13.9(tires spun like i was on ice) best was 13.1 @ 109 and 13.2 was fastest et of 112. Untuned same setup no more sputtering.

13.9 run
http://www.youtube.com/watch?v=kP_NRcOLG2o

13.1 run ( yea yea f'd up the burn out but hey i did better)
http://www.youtube.com/watch?v=8iU2nfYZqbA


47 degree's out

 

[IBoughtASupra]

13.1, not bad. What diff and clutch setup?

 

[OneJArpus]

13.1, not bad. What diff and clutch setup?

Stock 88 Diff
ACT PP & Full Face disc

Went again tonight

13.5
13.0
and last but not least (2nd run) 12.8 @ 113!

All on street tires FTW

 

[OneJArpus]

***** UPDATE *****

Got my driveshaft and decided hell, let me install it

Can you say, FITS like a glove? LOL

Dropped by Gonzy's house

Installed a lip i just picked up from him w00t (yea the plate is gone, it looked bad with it on like that)

Ahhh much better

One of my fav shots

My fav shot

Also installed my Greddy BCC and upped the boost to 15 PSI now i need a tune

 

[IBoughtASupra]

I always find it wierd that on one piece why they never keep the cup driveshaft where it enters the gearbox.

 

[OneJArpus]

I always find it wierd that on one piece why they never keep the cup driveshaft where it enters the gearbox.

me neither, but i guess thats just how they do it...

 

[OneJArpus]

Next on the mod list!

Cobra BBK

I'm trying to achieve this with a budget of $500.00 so far so good, Calipers purchased $400 to go.

 

[digihonk82]

I always see your sig. pic and get jealous...now your build thread came back around and I got to see your "roots" and I'm happy for ya!!

 

[OneJArpus]

Thanks Digihonk82 i look at the thread every so often and see how far i've come and keep thinking what will it look like 2-5 yrs from today..



What is this?

O yea, already got my calipers, awaiting on these bad boys then i'll order my rotors and carbotech pads.

 

[digihonk82]

Badass. I might add how nice Toyota was when they designed the brake/suspension setup b/c of how easy the removal of these parts is and how easy it would be to swap in some beefy new ones!

 

[OneJArpus]

Its been a year since i've updated this i'll be placing all my updates here through the week

 

[OneJArpus]

Most recent updates


490 whp max @ 25 psi dropping to 22 psi by redline on my current setup listed:
Stable 467@ 404ft lb @ 20 psi
1.5JZ Swap Hks 264 cams
Drewgo Manifold, MasterPower T61 .68 a/r, 44mm wastegate, 3" exhaust, 24x12x3 intercooler with 2.5" piping
FIC 850CC injectors, DM Fuel rail, AFPR, stock fuel lines, single walbro
ACT PP & Street disc, Lightweight fly wheel, lightweight 1pc driveshaft.
AEM 30-6050 DM ECU, Custom tweak harness, ATi Damper, AEM boost solenoid, & 1zzfe coils

I've changed my rear subframe after it cracked in many spots

I've installed LIP Traction arms & new sway bar end links (adjustable)

What my engine bay currently looks like

 

[OneJArpus]

Update:

Sent her off to the body shop Jan 2nd and shes been there since doing major work. All the dents dings were pulled, i shaved the squirters from the hood, i shaved the antenna, wiper arm, and holes for the wing. Pulled the dent i had behind the rear qtr moulding. I color matched the mouldings as well. I had all the glass pulled and doors removed for full body spray minus engine bay & interior. I had the rust on my quaters that was also repaired, all corners of the fenders and quaters were rolled already i had them flare them out even more to clear the wheels. Final pictures will be posted once it is out of the shop!

 

[OneJArpus]

shes back from the body shop sporting a full kit cf diffuser n a different colir

color inspired by

now shes getting some love for the interior

new carpet just arrived

 

[OneJArpus]

gutted my interior for a color change

threw on my spare wheels to get my gram lights refinished