hvyman;2088039 said:
yes for now, ill most likley make chromoly tubed ones if i have any issues at that power leel
2JZ/MK3/8.8 8 sec street car build.
- Thread starter madsupra88
- Start date
yes for now, ill most likley make chromoly tubed ones if i have any issues at that power leel
more mock up, and onto the final assembly of the differential. dont worry, knuckles will be blasted and coated with new bearings , just a mock up for now.
Ring and pinion
New diff cover
no more crush sleeve, solid pinion spacer now
master rebuild kit
Everything gets a nice bath before final assembly
Laying out parts
ring gear on and torqued
custom stubs are in
rear rotors came in
will have final assembly of diff tonight.
Ring and pinion
New diff cover
no more crush sleeve, solid pinion spacer now
master rebuild kit
Everything gets a nice bath before final assembly
Laying out parts
ring gear on and torqued
custom stubs are in
rear rotors came in
will have final assembly of diff tonight.
now we're getting somewhere, with all the work i have going on at the shop im practically living in the shop :/
pinion bearing and solid spacer on
setting preload
shimmed and back lash on point
pretty damn good i would say
new cover on and custom stubs in place
last test fit and measurements
new exhaust trim for the fender exit
tons more tomorrow
-Saif
pinion bearing and solid spacer on
setting preload
shimmed and back lash on point
pretty damn good i would say
new cover on and custom stubs in place
last test fit and measurements
new exhaust trim for the fender exit
tons more tomorrow
-Saif
miekedmr;2088596 said:
welp, i'm middle eastern with a shitty sense of humor. the name of my car is Camel SR, better idea of where this is going ? lol
If you're gonna do it, might as well do it right !!
here is how the car semi sits, no engine or trans in yet and alignment way off
Brakes are done
My favorite part, came out very clean .
here is how the car semi sits, no engine or trans in yet and alignment way off
Brakes are done
My favorite part, came out very clean .
whatsup guys,
Things came up, went to TX without the car as I have been slammed with customer cars. well FL2K is coming up. I paid for the events so i guess this means the car HAS to get finished for this event lol so I started back up to get her done by next month.
FL2K Prep
Prepping block for assembly
Custom spec Pistons at 11.3 comp
Girdled and torqued, ready for the head.
Floor pan stitched, ( this is what happens when you let raw metal sit around moisture :sad: )
Set in and stitched to the floor, mocking up fuel pump assembly (Prodigy adjustable fuel pump along with electronic adjustable fuel pressure regulator that I will have the Haltech control all)
all mocked up, car will be getting soda blasted, cleaned , seam sealed and painted. this weekend will have much more updates and motor should be in the car
-Saif
Things came up, went to TX without the car as I have been slammed with customer cars. well FL2K is coming up. I paid for the events so i guess this means the car HAS to get finished for this event lol so I started back up to get her done by next month.
FL2K Prep
Prepping block for assembly
Custom spec Pistons at 11.3 comp
Girdled and torqued, ready for the head.
Floor pan stitched, ( this is what happens when you let raw metal sit around moisture :sad: )
Set in and stitched to the floor, mocking up fuel pump assembly (Prodigy adjustable fuel pump along with electronic adjustable fuel pressure regulator that I will have the Haltech control all)
all mocked up, car will be getting soda blasted, cleaned , seam sealed and painted. this weekend will have much more updates and motor should be in the car
-Saif
well got quite a bit done .
Finished up building my friends shortblock for his Z31 (also known as the Habibi Machine and will be coming along to fl2K)
.
was able to finish my own bottom end is finally sealed up as well
all new hardware
the rear floor is sealed and painted as well just forgot to snap a pic and fuel setup is mounted as well. tons of updates by this coming weekend, motor and trans should be in by friday etc.
-Saif
Finished up building my friends shortblock for his Z31 (also known as the Habibi Machine and will be coming along to fl2K)
was able to finish my own bottom end is finally sealed up as well
all new hardware
the rear floor is sealed and painted as well just forgot to snap a pic and fuel setup is mounted as well. tons of updates by this coming weekend, motor and trans should be in by friday etc.
-Saif
little more porgress
trans kit is in
Engine/trans find thier way home
A simple frame tie/trans mount made. will have 2 extensions welded off of it as well to tie back to factory mounting.
Manifold in
wastegate was aining at the motor mount so it wouldnt fit. insead of custting the manifold up, i made a little relocation elbow. since i run a fender dump on this car, i had tons of room for placement and it came out perfect. My tig pedal broke so unfortunatley had to mig the elbow together.
sorry for the dark pics, but rear floor plan is done, seam sealed, hush matted and mounted fuel system
Shifter mounted
Currently how she sits, shes getting reaalllyyyy close, haltech comes in this week and the custom wiring will begin!
and a quick little sneak peak before final pic!!
Hope you guys enjoyed these updates, the car is gonna come out swinging and breathing fire "hopefully" end of this week if I am able to finish up other customer stuff first.
-Saif
trans kit is in
Engine/trans find thier way home
A simple frame tie/trans mount made. will have 2 extensions welded off of it as well to tie back to factory mounting.
Manifold in
wastegate was aining at the motor mount so it wouldnt fit. insead of custting the manifold up, i made a little relocation elbow. since i run a fender dump on this car, i had tons of room for placement and it came out perfect. My tig pedal broke so unfortunatley had to mig the elbow together.
sorry for the dark pics, but rear floor plan is done, seam sealed, hush matted and mounted fuel system
Shifter mounted
Currently how she sits, shes getting reaalllyyyy close, haltech comes in this week and the custom wiring will begin!
and a quick little sneak peak before final pic!!
Hope you guys enjoyed these updates, the car is gonna come out swinging and breathing fire "hopefully" end of this week if I am able to finish up other customer stuff first.
-Saif
More progress.
Custom driveshaft in the works, cold side piping done. all V bands except the t-bodt will have a boost brace. I did want to allow for a little bit of flex since there is no cage in the car yet.
Trans cooler setup, 34 row custom dimention to fit my area along with a nice heatsink, should make this trans happy. made brackets and mounted my spal fan
and final lay out , love it
Haltech goodies came in
more update tonight.
-Saif
Custom driveshaft in the works, cold side piping done. all V bands except the t-bodt will have a boost brace. I did want to allow for a little bit of flex since there is no cage in the car yet.
Trans cooler setup, 34 row custom dimention to fit my area along with a nice heatsink, should make this trans happy. made brackets and mounted my spal fan
and final lay out , love it
Haltech goodies came in
more update tonight.
-Saif