I need the C1 connector pin out for a 88 supra. I need to know what does what, but i cant locate it anywhere. i've searched all my brain can give me.
Ok, i wired my C1 connect CORRECTLY to the EA2.
Here is my problem now, the EFI fuse is getting power, the relay and resister is getting power, the injector clips are getting power, the fuel pump is NOT getting power.
I ran a wire from the blue/black wire off of the Fuel pump relay to the positive terminal (recommended by my friend to try) and the fuel pump and injectors come alive!...
What could be causing this?
suprastanger507mgte;1150911 said:c1 - 1 = EFI Relay (1st connctor (2F) - 5 ) under engine bay fuse box - Black/Yellow
c1-2 = EFI Relay ( 2F-8 ) - Black/Orange
c1-4 = EFI Relay (2f-2) - Black/Red
c1-3 = White =
C1-5 = White/Black =
C1-6 = Blue/White = comes from A/C Water Temp SW # 2
location of 2-f :
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=18
And the wires :
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=19
Ok, i wired my C1 connect CORRECTLY to the EA2.
Here is my problem now, the EFI fuse is getting power, the relay and resister is getting power, the injector clips are getting power, the fuel pump is NOT getting power.
I ran a wire from the blue/black wire off of the Fuel pump relay to the positive terminal (recommended by my friend to try) and the fuel pump and injectors come alive!...
What could be causing this?