Search results

Hi I am trying to import a 1993 supra tt from vancouver,bc and I was wondering if the emissions will be in compliance here in seattle? And whats the process of getting it across the border? P.S and also the car was also imported already from japan. Thanks, Walter

i have a 88 supra 5speed with about 440 whp and i want to stick to the dragstrip.so i was thinking of doing a th350 swap.does anyone make bellhousing adapters and crossmember or does everything have to be custom?

this problem just started happening yesterday,idont know if its just cuz its cold now or what.it will boost then around 10 or 12 psi it will get boost cut,code 34.wats normal boost cut with the lex afm anyways?i thought it is higher than that.heres my mods: turbonetics 60-1 lex afm rc 550's...

im havin a problem wen i start to hit boost it seems like the spark blows out.ive tried new plugs different gaps everything,im lost.could it be the igniter or should i start looking elsewhere? thanks walter

we just got the aem all wired in with map sensor,ait add gm boost solenoid.ever since we hooked it up the car misses bigtime!i heard when using the stock igniter it doesnt produce enough spark with the aem.if thats the problem can anyone help me out with what they have done for there ignition...

just wondering when do u know if the piston rings are seated.i searched to no avail.thanks walt

just wonderin if i need the isc pipe going into the intake when i have my ems hooked up?im runnin the ems with map sensor.thanks walt

ive been using royal purple 10w-40.i just wanna protect my rebuild the right way,so help me out.thanks walt

will an n/a egr work for the 7mgte.theres only 1 junkyard that has an egr valve and its on a n/a.or is it better go new?

i noticed they have actuator brackets for the boss turbos at suprasport.i was just wondering if they will work for the turbonetics turbos?i have the 60-1.if so they two brackets,the e-bracket and the gts bracket.which do i need.also does their actuator work for my turbo?thank you much.

i have the following mods;turbonetics 60-1,bc 264 cams,hks 1 mm stopper,lex afm until its broken in,then the aem ems and map sensor,looking to run 15-18 psi max,24x12 intercooler with 2.5 hardpipes,020 wiseco pistons,eagle h beam rods,bic ddp,blitz 3 inch no cats,and looking for 400-450 whp.i...

im jus curious when r egts getting to hot.my car has gotten up to about 1400 degrees.u think thats to hot or is that normal.

hi just got my car running after my rebuild and just wondering how many miles till break in and how many rpms i should stay under.thanks walt

i just got my car running and driving and im stoked!now after its broken in i need to do some type of engine management.the maft pro came to my attention,it sounds pretty good and is a heck of lot cheaper than standalone.please tell me pros and cons compared to other piggyback...

i removed my egr and i want to know what i should do with the vsv,take them out and let the wires dangle or leave them in.

hi i have just rebuilt my motor with following mods:turbonetics 60-1 turbo,b c stage 2 cams,hks 1mil stopper gasket,.020 wiscoe pistons,eagle rods,3 inch all the way out,titan cam gears.i was thinking about aem ems but its a lot of money and i already have a apexi afc neo.so the question is will...

if so i need some advice on adjusting them. i have the stage 2 264 duration im having some serious problems with them right now. its backfiring out the intake and im getting dirty looking water into the intercooler and piping and the throttlebody.please help me.or if there is anyone i could get...

hi i have jus rebuilt my motor got it all back together and it backfire out the intake.ive seen a thread on here about stage 2 cams being a little iffy.i think the cam timing is off but the machine shop insists it right.i have titan adj. cam gears and exhaust is adj.about1degree and intake about...

hi i just got my motor in my car got everything wired up and iwas trying to start it but it kinda starts then dies.it kinda acts like its out of time but i dont think it is.thanks walt.

i just got my motor back from machine shop i got the motor all together but i need to know how to position the cam sensor i have stage 2 cams also i dont know if that makes a differance.thanks walt.