Search results

  1. M

    Aristo 2jz limp mode?

    Hey guys, Been out of the supra game for a few years, and itching to get back. I have the opportunity to pick up an 89 in decent shape with a complete aristo 2jz vvti swap for very short money, the drawback being that it is stuck in "limp mode" The swap is stock, I have heard nightmare...
  2. M

    Hope this isnt a repost CRAIGSLIST AWESOMENESS

    Hey all, Hope Im not reposting this, but who here thinks craigslist is awesome, but is endlessly pissed off by only being able to search tiny areas? i have been searching for a site like this for months, and finally found one. it allows you to pick areas collectively and search them all...
  3. M

    Symptoms of a Dying Rack?

    Hey all, So over the course of the last 6 months, i have overhauled pretty much my entire steering system, Ball joints, bushings, tie rods, shimmed the column, and all of them did need replacing. i wasn't just throwing parts at a mystery problem. but I still have play in the steering (i...
  4. M

    What Else Should I Do??

    So i got my Tax Return, and its all goin into basically a suspension and steering overhaul. So far I have ordered: -Inner and outer tie rod ends -Lower Ball joints -Energy suspension control arm bushings -Eibach Prokits -SS brake lines I already have tokico illumina's, which are going...
  5. M

    I just had to post this...ricers

    So yesterday im driving, and i stop at a local liquor store, come out and decide to check the oil before i leave. so i pop the hood, immediately attracting the attention of the integra with the coffee can. so he farts on over. i gotta say, he was a nice guy, complementing the condition of...
  6. M

    Targa Bolts?

    Hey, i tried searching this, but came up with nada. Does anyone know the size and thread of the bolts on the targa top? im in the process of building a drop in brace for when the top is off...to keep the car from driving like a wet noodle. also, for people with a front/rear strut...
  7. M

    Play in my steering Need help please

    Hey guys Well like the title says, I have about 40 degrees of free play in my steering. (20 left 20 right) it likes to walk around on the highway, and it is beginning to get worse and worse. I'll be able to get under the car tomorrow and check for play. But I was hoping to get some...
  8. M

    Fog Light Dimension

    Hey guys, i was wondering if anyone knows the dimensions (height/width/depth) of the stock foglights (89+) i would go out and measure, but the parking lot is about a mile and its snowing like a bastard out... thanks, -Trevor
  9. M

    MKIII Dash Cover

    Hey Guys, not sure if this is a repost, but just figured id throw this up there just in case anyone is interested. thinking about checking it out myself...
  10. M

    Head Tap & Screwy Idle

    hey guys, so i have a few minor problems i was hoping to get a little help with. first, when the car is idleing or revving below 1300 RPM, i get a slight tapping. I uploaded a video of it, and if you listen very closely, you can hear it. I know its coming from the head, but have not had...
  11. M

    Injectors 550 to 370 swap

    Hey guys, so my 1jz is currently wired for USDM 550's, and since i am running a near stock setup, or at least i am at stock boost. For gas mileage and tuning reasons, i want to put the 370's back in. what do i need to do in order to put them back in, as far as removing/bypassing...
  12. M

    Ride Safely

    I dont know how many of you guys keep an eye on this site, but the offers are closing on this one tomorrow. if i had the money i would grab it. i dont, so i figured i would put it out there. 90 black -Trevor
  13. M

    Gauge Cluster Help

    Hi Guys, I was not sure whether to post this in the 1JZ section or here, so i appologise if this is in the wrong spot. Ever since i did my 1j swap, i have not had a working Tach, fuel, or any engine data gauges. no cel, or the other three lights around it. No Clock I believe that...
  14. M

    Octane Booster

    Hey all, i know there is a very in depth thread somewhere on here about additives for fuel to boost octane. if i remember correctly it was a type of alcohol that is added along with a type of oil that ends in a safer than race gas octane boost. if anyone can remind me what it is...
  15. M

    Dual Exhaust 1JZ

    Just out of curiosity has anyone ever heard of or seen a dual exhaust setup coming directly off each turbo to like sidepipes or something? i have seen pics of one that came off a single turbo and strait out the front fender, but i have access to a metal shop and am thinking about whipping up...
  16. M

    A/F Tuning with SAFC

    Hey Guys, So I have my SAFC tuned pretty well, but i am trying to get it fine tuned, and get some peace of mind clearing up a few questions. i read over the tuning thread in the ref section, and a few other sources as well. i have it tuned as recomended. the few questions i have are...
  17. M

    Isolated Lean Spike

    Hey All, I recently got my PLX wideband installed, and properly tuned my safc. it runs perfect through almost the entire rpm band, whether i am under boost or just cruising, except for right from 2000-2150 RPM on the low throttle setting of the SAFC. Under normal (not WOT)...
  18. M

    Pics of Stock ECU Installed

    Does anyone by any chance have a pic of their stock ECU bolted into position behind the glove box? Or is the mounting for the 1JZ ECU somehow different from the 7M ecu? I can't for the life of me figure out how to bolt my 1J ECU into poisition... Thanks, -Trevor
  19. M

    Ebay Boost Gauge

    Hey all, well here is another "is this ebay product any good post" my friend is in the market for a boost gauge, so i told him i would ask what the highly educated supra community thinks about his choice. i reccomended not go the ebay route, and buy an autometer or a prosport gauge (budget is...
  20. M

    Brakes won't let go

    so i did my brakes yesterday pads, and had the rotors turned (lemme just say F**K whoever decided to use those little banana springs to keep the pads seated) anyway, got them all done, bled, greased the pins as best i could without seperating the caliper, and got the wheels back on. and took...