Search results

i'm assuming it's an 86.5

i asked IJ about a lapping plate for the deck and head and he said for me to PM you i am lookin for one to buy a good sized one i am not sure where to go to get one PM me back with any info you may have THANKS and happy holidays to you

yakuzastinger / CJ

Love red green

jdub: well i just wanted to post i read that and figured u were right hehe

sounds like the heater core system is leaking somewhere

ur computer should idle the engine up when u press the AC button u might want to check and insure ur ac clutch is engaging when u press the button

take a pic of the other side of the block answering IJ's question and possibly hommers as well as mine about the knock sensor port and turbo drain and etc etc

im going with a brick out of cannon some what like brents turbo trash can idea

its the same flywheel. U need to be careful using a fidanza both for balance of the engine are for more importantly its material welding it self to ur clutch material also i have found they wear out rather quick (which i know is why there are inserts that are on back order hmmm)

Depends on how much $$ i can throw at this but i need a new eman harness and i would like to get a harness exteneder as it is from auto wiring and make my own quick harness i think its the best way to go though a bit pricey i did contact greddy as useless as that was kid said they be...

i have got all the greddy manuals checked the pinout on SM vs greddys both seem to match. Big problem i ran into is there is a quick connect harness on this Eman but greddy does not make one for the supra 1j make on for all the other 1js but not the supra. Sat down for hours chasing...

i have got all the greddy manuals checked the pinout on SM vs greddys both seem to match. Big problem i ran into is there is a quick connect harness on this Eman but greddy does not make one for the supra 1j make on for all the other 1js but not the supra. Sat down for hours...

I have an eman U here going on a stock 1j mk3 mods to come of course i have been reading for days and days on info on both forums and i have found some ecu pinouts but not exactly what i want The eman i have has a 1j plug n play harness but the pinouts in the Eman U install...

I have an eman U here going on a stock 1j mk3 mods to come of course i have been reading for days and days on info on both forums and i have found some ecu pinouts but not exactly what i want The eman i have has a 1j plug n play harness but the pinouts in the Eman U install...

shit ill post first with nothing to say

centerforce is a decent clutch and a good company to back their product i run a different brand in my supra but the mustangs i have done ran centerforce and ran the piss outta of them. Also a local toyota place runs centerforce in their mk3s only clutch they said that they could get to...

B get em and try u know ill stand there and tell you when they do or dont

i have pulled prolly close to a 100 with the hooks and the tranny attached i just jack the back of the car up and leave the front on the fround the angle allows the tranny to come out level i use the leveler on the hoist its comes right out i am sorry to hear ur misfortune things happen...

That's actually how I got my disc to break free from the F/W. Cranked it in reverse with the clutch pedal down, and it went about 1 meter uphill and broke free. -brent (on friend's computer)