I need to know what these are to wire up vss to my standalone. I know 1 is ground 1 is power and 1 is signal. But I have been searching for a pinout. Its a r154 here are the wire colors. Thanks for any help.
Well finally got my car on the road again. And I am wondering what the average compression test you guys are seeing with bc 264 cams?. My stock cams made 175 180 acrossed the board
Before degreeing the cams in. I was 165 across the board . Looking for some feed back on what other members with...
I have the opertunity to properly ratio my clutch pedal. I'm trying to fin out the minimum pull needed to relase the clutch disk. I have 3 emails into comp cluch on this subject. Was just wonderin if anyone know this dimension. I have went thru every thread in this section and been goolging all...
My 1j is swapped in to a bmw and I have always had to fight relacation on the oil filter because of the water cooler.
So while my motor is out I would like to keep and relocate the. Water cooled oil cooler off of the housing and mount it right to the block and than relocate to a bigger filter...
Just was wondering how to tell the diff between the intake and ex stem seals.. I have a left over bag of them from a friend. And one set is light in color other set is dark. Haow do I know whitch sel is witch.. they are factory toyota but no part numbers on the bags
I figured this sub forum would be the best location for this question. Bases on the fact that you would be running e85 only with standalone.. but anyways
What kind of fuel milage are guys getting on e85 as far as daily driving goes. I don't plan on running e85 all the time. But was just...
I am looking into new injectors for my 1j and came across these. Was wondering if anyone has any exp with them good or bad let me know.
Check out this item I found on eBay: http://pages.ebay.com/motors/link/?nav=item.view&id=261156448676
Sorry about the video length. Oppent was a 347 stroked mustange. 1\4 mile
http://static.photobucket.com/player.swf?file=http://vid1190.photobucket.com/albums/z445/525gte/015.mp4
I am on the left
Does anyone else have this problem.?
My exhaust side vavle cover leaks oil on the back side towards the fire wall.. and no matter what I do it always comes back..
Here is what I have done.
New gaskets 3 times. Fixes the oil leak for about 300 miles
I have done it with sealant and with...
Was wondering if anyone has had this issue.. recently car has started to run rich under boost. Just a random occurace.. no changes to sfac2..
I swapped the air temp sensor with one from a 2j. The problem was fixed.. so I added fuel back in to the curve (I took some out trying to fix the rich...
since this i have picked up a divided 6262 . i can remeber the turbo that is on it now. i think it somewhere near a 57 62 with a 64 ar.. percision . so new twinscrol should be alot better for my car.
and that is at 21psi. his map on the dyno is off
on a stock supra with a 1j and the twins .. where does this water line go. the bigger one that is going up in the pic
see i am having issues controlling temp. and i think it is cuz the toyota does not talk well with the bimmer.. right now i have it as a return out of the heater core. and that...
So for those of us with out standalones. Have any of you tryd this map clamp trick to raise or eliminate your fuel cut on a 1j ..
Here is the link if you have not seen this http://www.thedodgegarage.com/turbo_map.html
So I am contenplating on trying this and just controlling boost with the...
going to be good day also not so good, was unable to get a working set of 440s in time. so i have to dyno on my stockers.
also going to get tuned while i am their. ill post numbers later hoping to see close to 400 maybe 380. that will be a good base line.
Toasted my clutch tonight. I made the common mistake and bought a ebay clutch .. I had a spec stage 3 with kevlar 6 puck.. 1st. Time I have had the balls to launch the car. Took it to 5k slipped it out .. it popped and went nowhere.. clutch is gone. When I let clutch out i Hear it spinn but car...
Finnally got the balls up to go for a real drive since I got the 1j swap done in. The bimmer.. decided to head east over the mountains.. 560 miles later I was home drove perfect loved the higher altitude twistys.. I had put about 2000 miles on round town and here or their.. but was affraid to go...
looking for a bushing kit for the r154 with the remote mount shifter . i think its a soarer 154. shifter is real sloppy feeels like it needs new bushings?? any idea where i can get some
so i have a 1j, and my motor never cam with a fan on it. it did have the hydro fan assembly, but with keeping it clean i took it off and whent with a 2j pump. i am now running a electric fan, but to be honesti would rather ditch all the extra wire and possibly run a clutch fan, just for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.