Sheedy126.....yes, that looks good
I ran 275's on mk4 TT rims with no spacers. No issues. Problem is there seems to be no more TT rims for sale anymore.
I want to see some pics of guys running 275 rear tires on different offsets. 17x9 or 9.5
I think 20mm offset wont work with a 275. Hard to get reasonable priced rims in a good offset for a mk3.
Should have kept my Work Equips.
Want to run staggered 17x9.5 and 8's. Or something close to that...
Trying to work the bugs out of this car I just bought. Seems to be a never ending battle.
90 turbo supra with pps rack.
The return line at the rack has a banjo fitting with a short pipe. The rubber hose clamps to it. The small pipe has a pin hole in it. Need to replace & na separate at...
Pushlock hose supposedly rated to 100psi. I just hate wasting money on fittings and braided line for this.
I plan on running new line later when I'm ready to redo the underside of car.
So I'm making a piece with braided line and some fittings. Tired of car sitting.
Filter end is a 12x1.25 I think.
Yes, the overpriced flex hose. Cant use barb fittings.
I have one shop here that makes hoses. Will see this morning if they can do it. I know theyll have the 14mm fitting, not sure about the banjo fitting. Maybe a 90 deg fitting with same thread. But of...
So, my pump hanger started leaking from rust. Replaced it and the rubber line from the hanger to the filter is leaking. This is discontinued from Toyota.
Are there any alternatives to replacing hose? Banjo fitting at filter and I assume metric at hanger line.
Just wondering if anyone...
I just ordered new from dealer. Fairly cheap. I would get the one that runs clear across firewall for na car.
I think proportioning valve is different, you'll need to check.
Most lines at parts stores are 3/16" tube with metric fittings which will work. Just need correct thread. OEM is...
Anyone run 15x10 Weld Wheels on rear? Didn't see any listed. I know guys running the 15x8's. Don't remember all the backspacing on them. I know there's a 7.5" backspace.
Just curious.
Was wondering if anyone actually had any of these replaced under warranty?
I just bought a set of Tokico Illumina 2's with Eibach springs. Supposedly around 1 yr old. They look like new. Problem is one is covered in oil. Wasn't sure what kind of pain is to warranty as in needing receipt...
I was thinking of using the 89 or a mk4 wheel. Didn't realize the cruise stalk was on the wheel. I hate buying cars that people tore apart. I ended up with another 90 car for parts, so I might just throw on the 90 wheel for now.
Disconnect battery for airbag. Yep, not my first...
Was wondering what it takes to put a non airbag wheel on a 90-92 car.
Bought this car recently with an aftermarket wheel. Want to install a 89 wheel or maybe a 3 spoke mk4.
Not sure what to change so cruise works on at least the 89 wheel.
If a 90 has the separate cruise stalk like the...
Yes, 6mm x 1.0 pitch
If that's too big, either someone drilled out one if broke or the welded nut on backside broke off.
I have had a couple of cars where the screws broke off. I just drilled out and re-tapped.
That's why I would run a steel one. I had a Jawsgear one piece steel on my car I sold. Ran it for a couple of years. Never any problems. Just wasn't sure who was out there building quality stuff.
I have a shop here that does great work. Built several for my old muscle cars. Only problem is...
Who makes quality one piece driveshafts?
Been out of the supra a little while now.
I had a Jawsgear one before. Seemed good, but don't see on the website.
Looking for steel.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.