Search results

I have a VEMS ECU that has potential to do CAN-BUS thus using the Holset controller or I might fabricate a remotely mounted stepper and run a control arm using spare outputs from the VEMS.

I have a wee problem with the turbo I have, it is the HE351ve with the variable vain gizmo. I have a 935 stainless header for the 1jz with a divided T4 flange. The 351 uses a nonstandard flange that fits between a T3 and the T4. I have found a mild steel flange for the 351. The conundrum is do I...

Ken Block Gymkhana practice in a Subaru

A locost ~1300 lb car, would do it with a 200 hp four would do the trick

Might you try your hand at a kit car, like the locost, most use i4, but an i6 has been done.

Thanks !

Does anyone have a good picture of the Rear Cross member showing the bushings installed?

This is not a logical statement. The backbone could not support this. The capacity is there for brief periods of Max usage.

In the AWD category Audi S4, Subaru Sti, not a Six but who is counting, the SVX if you are :icon_bigg VW R32. Mazdaspeed6. Saab 9-2X In the RWD category Honda NSX still about 30000 to get in this club. Chevrolet Corvette C6 Pontiac GTO, G8 Chrysler Crossfire There are more...

Had this happen to me, $1500. Visa called me was how I found out. the funny thing was that all the merchandise was delivered to MY address. No I was not on Ambien :icon_razz. Strange thing was that it happened on the same day that a coworker was asked to "leave", all the charges happened after...

The rear crossmember has six bushings made in three pairs that are color coded Blue, Red, Yellow. Which go where? Front inner = ? Front outer =? Rear =? Thanks

Its is a master piece, 2008 ride of the year?

Just saw a news article Link, 71 year old Marine(ret) defends self and employee of a Subway from two 20 something asshats, killing one. He had a concealed carry permit. The Grand Mother of the surviving criminals, objects to characterization in the media of the Marine(ret) being called a Hero...

Kristen Hersh - Bright Yellow Gun

Because its cheaper high than Drugs :icon_bigg

Why would the gearing matter to the dynamometer ? It is what is measuring your torque and as long as you are accurately measuring engine RPM, gearing has what to do with it? the 1:1 idea is seems bogus because it is not the only "gearing component" in your drive line, there is the obvious...

Fusions, by Bridgestone good bang for the buck

Something like this?http://cgi.ebay.com/ebaymotors/Universal-Fiberglass-GT300-Rear-diffuser-Supra_W0QQitemZ280216991796QQcmdZViewItem

It is true that the head is exposed to high temperatures, like the exhaust gas , so the fire may not have damaged it at all. But I have seen fires hot enough to slag blocks into nice puddles of used to be cool engine. So you will just have to dissemble and check tolerances.