Great, minus Saturday in the light rain.
Sunday was nice and we cruised with 6 MK3's including 3 1j's plus a MK4 and a very impressive TT Lexus.....and a Saab.....and a Satlelite. The Satlelite was sweeeet.
Should've been there.
Yes the car bucks before it dies, and yes throttle will save it.
I have NGK plug and wires, both fairly new. Checked the ISC. I will test the coil packs, never have before.
Your not going to believe this but I swapped in my other AFM and it idles now. Still seems like it's missing just...
My car will not Idle after it warms-up. Car idles very smooth until operating temp is reached.
No Codes
Reset ECU, returns
Calibrated TPS
Cleaned ISC 2 times, clicks good
Timing good
No boost-leaks
Vacuum lines checked
This happened to me 1 time last week @ one stop-light, now it’s...
I am having the exact same issue you are. ^
The car will idle ok when 1st started and always runs great on the gas.
When I let it idle @ operating temp it gets rough and will eventually die. I'm not pulling any codes either. This happened to me one time @ one stop-light last week, then...
I'm in of course.....James(suprafan), thier is a ton of places to stay around where I live. You can always crash @ myplace on the couch or air-mattress. Then again I could have a bigger place by April.
Since Jason sold his supra, he should have to sleep outside and wear a dress to the meet.
Yeah Just came up from the garage.....the JDM Harness is alot shorter. DOH!
It looks like it might....maybee....almost reach but i dont think so. Anyone ever lengthened one before???
I also wonder what sensors if ANY I could use off the JDM 89+?
Werewolf: I wasn't quite clear that I...
Hey everyone,
I have a 87t 5spd car.
I just recieved a shockingly clean JDM 7mgte and a 99% perfect harness w/ECU..Auto 89+... I got lucky.....
Can I use the JDM ECU/Harness in my car? Do the 5spd mod to the harness? I know it can be done on auto USDM ECU and harness.
The harness on...
^ The meet was back in last april...and we did tell everyone about it in the SF KC thread......Jason came up for it. I think you were on the road back then maybe?
My pic above is a failed block test....@ I've got a slight BHG going on, it was tough to catch. I'm not getting my oil wet or...
^ SomeBeach I've tried calling you and your sister Todd. I get the VoiceMail everytime.
We've all been busy busy. As for my car, it actually runs strong as hell (for the 1st 20mins). I need to get my new injectors tested though.(venom)
I've got a little bit of this going on:
I think he was reffering to the milling, decking, I wouldn't need new pistons ETC. Just to have my block and head checked and cut flat. I could handle the rest..... I think.
^ T
This nice guy sold me his Struts and cut+welded springs on ebay. Listed them as "EBC 2" Lowering springs". What a great guy.
Your car rode like crap because you or someone slaughtered the springs.
I only wish it was that easy of a decision. Just to name a few, I have the loudest head you've ever heard, what seems to be a slight knock and the wiring harness is down-right scary.
Still not 100 % what I'm going to do.
I was under the impression that the machine shop would be more...
Hey Againstdawall, Hows it going, I think your the guy I gave my old accordion hose to on the River Road Cruise. One of you guys?
I'm kinda in the same boat. My car has had intermittent slight BHG for the last 2 years that I never could actually confirm until now. I have no idea what the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.