Search results

Curious to see if anyone has ever mini tubbed an mk3? I currently run a set of the MT 275 pros out back, but in order to run them I need to use a set of shock spacers/adapters. Im looking to push the tire out towards the quarter panel, stretch and roll the fenders a bit more and hopefully...

I am swapping back from a TH400 to a V160, I was looking at the two clutch switches last night and realized that there two of them on the clutch pedal assembly. I'm assuming the two wire was used for a clutch safety switch when starting the car, but wondered what the 3 wire switch was for...

Ive been trying to find a few pictures so I can have a look at the engine mounting differences of the pre 89 and post 89 front subframe. If anyone has a picture of either that they could post up, that would be great. Thanks.

Hey guys, after breaking at the track a few weeks ago, ive found the need to finally get the car setup with some easy to access tow hooks to get the car on the trailer, or out of the staging lanes if required. My stock tow hooks in the front are not accessible from the front of the car...

Had a good first outing, and a great first run in, but broke the diff second pass. We got some great feedback from the car, and once we get the diff fixed should be able to muster up a high 9 second pass. Onto the vids! Go-Pro View http://www.youtube.com/v/SCv1n3IHU3Q I love this...

Hey guys, I am looking at buying a set of drag lites, but without the wheels in my hands, does anyone happen to know if the factory length wheel studs will work, or will I need to buy a set of longer studs? I know the welds are lugcentric, and that the lugs actually recess into the wheels...

I've been trying to do as much research on our diff as possible lately. I'm looking at any possibilities of upgrading the factory mk3 diff/case. I see that the mk4 diff gets a substantial strength increase by using a billet diff cover. Would something similar to this help the mk3 case...

I have a one piece drive shaft, mated to my 2jz, th400 supra. We are getting a weird vibration in the car. The vibration osilates and gets worse as you reach hiway speeds. Someone had mentioned checking the driveshaft angle to make sure its correct. My question is, what is the angle suppose...

Hey guys, I have 2jz, th400 swapped mk3, and currently running a 3.91 diff gear set. Its a bit much for the hiway, so im looking to swap it out if possible. I remember awhile back that weir performance was making a 3.58 gear set, but after contacting them they said they didn't have any left...

Hey guys, Im looking to temporarily hook up my factory tach, but I need to feed it a tach signal from my aem. So my question is, what type of signal does the factory tach need to see? Right now my AEM is setup for COPS configured in wasted spark. I still have to look into what type of signal...

If you didn't see my other thread about my flex-a-lite fans, here is a cliff notes: -car came with a koyo rad and dual flex a lites -one of the fans kicked the bucket -im either looking to replace the dead fan or replace the entire dual fan setup The car has a 2jz-ge, 76mm turbo...

I have a quick question for you guys running an alum. rad with the dual flex-a-lite fans. I have a full painless harness in my car which only has a 20amp fan circuit. The circuit is fine when cold/testing in the garage, but once the car is hot, or ambient temps are pretty high, it starts to...

I have an 87 that the rack is leaking. Do they make a rebuild kit for it at all? It looks to be some sort of seal inside the rack itself that is leaking. I would need to take it apart to see for sure, but Id also need to replace the boots as well. If anyone has a part number for the...

Hey guys, i need some help with which power steering line goes where. If someone can help me out that would be great. Here is a picture of the lines and pump: First photo is of the two lines coming from the rack, Im assuming one of these goes to the pump and the other to the return side of...

Im in the middle of doing my 4" exhaust and im looking for pictures of other ppl's setups to see how their exhaust sits in comparison to my own. To me it seems like it is sitting very low, but its litteraly as tight to the chassis as i can make it without touching. If you have any under...

Hey guys, i have an na-t 2jz that was swapped into my mk3. I have a koyo rad, and ive made the lower rad hose, but im wondering what everyone is using for the upper rad hose? Will the factory na 2jz hose work? Thanks Ryan

Hey guys, im in the middle of mocking up my intercooler and charge pipes right now. I was wondering if anyone could post pictures of how your passanger side piping is routed. I should also mention this is for a single, but even twins post away. Id like to get an idea of how they are...

Hey guys, im in the middle of installing my painless harness in the car. Can someone tell me what function each click on the headlight switch performs? Off first click = ?? interior gauges light up ?? Second click = ?? side markers and tail lights turn on ?? Third click = ...

Its been a long road for the past year since i bought the car. It came to me as a stripped/parted out car, and mostly everything for the car came in a box. We managed to get the car on my car trailor and to my house, where its sat for the past year while i worked on it. Here is the progress...

Hey guys, ive been going through the wiring in my car for the past few weeks now, and its alot more difficult then i had hoped. At this point i am considering buying a painless chassis harness and be done with it. My question is, has anyone been successfull in wiring in the painless harness to...