Here is what i have...
This thing is huge, and when i drilled out the hole to fit my -8 bulk head fitting and tried to put my -8 barb fitting on the bulk head, it wouldn't go because the hanger bends right in the way. So i cut a little acccess for the barb to face down but its now behind the...
I just got my license and a bike and was wondering if there are any other avid 2 wheel lovers on the forums.
This is my first bike, i'm loving every minute i'm on it. Riding is so much fun!!!!!!
2010 Kawasaki Ninja 250R - $3,300 purchase price with 1,500 miles
I went to the dyno today and have 7 hours of being there and doing things i have major issues.
It will not free rev or underload go past 5000-5500, it just breaks up so bad. The tuner tried everything with the AEM and couldn't get it to go. He mentioned that the teeth count for the fuel was a...
Ok, i have the holes cut and gauges mounted, where is the best place to tap into for power? I've been looking for a wiring diagram of the cluster and i was thinking of tapping into the cluster, but i dont know what would be a good source with out a diagram.
I have a new water temp, boost, and...
Hello, i picked up an AEM unit and after my tune i want to build my fuel system up a bit. I currently have a walbro intank using stock lines and 550cc injectors. I would like to run one in tank and one external with a surge tank and 1k injectors. I have come across two tanks that are very...
Copied this from my friend who's throwing a meet. Its diverse group of people so he extended the invite to the supra family. Come if you want.
"I swore that i wouldnt throw another meet. Ok... So i lied! Its time to bring back my epic beginning of the season meet. Just like old times. I know...
Ok, 1.5JZ Swap 550cc Walbro Pump Single Turbo OEM Computer, SAFC, & Greddy BCC.
I was driving home from work yesterday and it stalled out on me when coming to a stop sign. I start it up it ran rough, and if i tap the gas lightly it started to move but then flooded and died. I've come to the...
Looking to rent a fender roller ASAP i live in newark and i can drive to you if you aren't far (NO HIGHWAYS) It rubs that bad over big bumps, low speeds im fine. If you have one and live pretty close text me 973 336 0966 thanks
Installed an oil pressure gauge in my car a few nights ago, then that same night boom, the crank pulley decides they want a divorce and they just split up on me! Good thing i wasn't going fast, and i was doing a u-turn it just mearly bailed and fell on my splash shield... any how here are some...
Ok 1.5jz swap single turbo new coils...
I had NGK I12 iridium plugs in there, no gap done to them, they would idle good and some times mis slightly. But in the upper RPMS 4/5K they would misfire bad (in boost)
I figure what the hell let me change out the plugs, i tried out NGK BKR6ES-11...
Here is what i did with my 1JZGTE headgasket i've had laying around since i started my swap... hope you enjoy - ran low on ink so 1 cyl is empty but with a great family, you'll have good compression for a life time =D
First picture MOM, DAD, ANT lil brother , LIL D my lil nephew , & CIARA...
OK.
I have purchased a reman brake master cylinder (abs). I bench belt it on that car, hooked up the fittings, put the lines into the res, pumped it a bunch of time til there was NO air in the system.
I hook up the lines, i go to the RR tire hook up my mighty vac and i sit there for 40+...
Funny story! Funny Videos
If its a repost i'll just delete it, if not its funny.
http://www.honda-tech.com/showthread.php?t=2934226
Cliff notes: CRX Gets stolen, ends up @ a honda-tech meet. Original owner saw his car jumped in it. This fat girl traded her integra for this crx...
We do NOT have any MKIII's in the yard. BUT We do have a GS300 w/2JZGE in it (VVTi) If you have a daily and need parts from it put a message in the thread and i'll look up and see what i can do for you guys/gals. If this is not acceptable delete and i'm sorry.
To All:
I've been talking to a local drive shaft shop here in New Jersey. I gave them a R154 D/S and asked them to give me a price on how much it would be to make 1. Then asked if they would be interested in helping the supra community with building multiple drive shafts. They were thrilled...
http://cgi.ebay.com/ebaymotors/R-154-Supra-CARBON-FIBER-inspection-covers-MKIII-1JZ-_W0QQcmdZViewItemQQhashZitem2a0e7115e9QQitemZ180630918633QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_910wt_1165
WTF is up with this!? Seriously LOL
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.