Hey Matt, I have rebuilt many heads already and have tons of already cleaned up spare parts (valves, springs, shims) for the jz heads. Let me know if your willing to work something out!
Just a little update:
After cleaning the inside of the distributor with CRC electrical cleaner, i let it dry for a couple nights. I also managed to clean up the connector coming off of it. I then commenced to check the conditions of the wires leading back from the dizzy and noticed that the...
I think my check engine problem is due to the fact that i installed an in-guage aftermarket oil pressure gauge and left the bulb directly behind the OE oil press gauge out since the aftermarket gauge has one in it.
Thanks Asterix, i checked all the clearances (air gaps) and their within spec...
After putting my motor back together after a bhg, i noticed it had a random misfire at idle and when reved up and held at any rpm you can hear the "put-puttin" every second or so from the tail pipe.
I checked the resistance of the pick up coils in on the distributor and compared them to the...
Been doing a bunch of searching, can't find the resistance values for the knock sensor on a 86.5 7mge..is it even in the tsrm?
Sent from my LG-LS980 using Tapatalk
Damn, learn something new everyday. Thanks for the info and suggestions IJ.
I will definitely test for that once i get it all back together..
If i get this problem dealt with.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.