Maft Pro Boost Control Wiring

[dumbo]

Sorry I cant find the wiring for the boost control solenoid for the Maft-Pro.
I dont need the vacum lines diagram, just what wires do the 2 wires from the solenoid go to on the maft unit. If this is a double post could someone post that thread thanks a lot guys,gals.


Ohh I dont have the harness, so please just the terminals the wires go to.

 

[jdub]

Let me Google that for you






(short answer = 8 pin connector, terminals 7 & 8)

 

[dumbo]

Let me Google that for you






(short answer = 8 pin connector, terminals 7 & 8)

:icon_razz Thanks!

But my second question is my boostcontrol solenoid only has two black wires. Being a solenoid it probably wont matter how I hook it up eh?

 

[sneakypete]

so there isnt a connector coming off the boost solenoid?

 

[dumbo]

so there isnt a connector coming off the boost solenoid?

There is a 2 wire plug off the solenoid, but not off the maft pro unit/harness.
I'm sure it was short shipped or something, but I am just gonna solder it.

sneakypete...dejavu???

 

[sneakypete]

i dont have a pin layout of the maftpro unit... there should be one in the piggyback section. pin 7 and 8 i dont think it matters which wire goes to which

 

[dumbo]

All the layout sais is pin 7 +12volts to solenoid
pin 8-boost solenoid control signal

I dont tihnk it will matter either its only a solenoid,
but if anyone has theres out I would apperciate if you could tell me where pin 8 went to on the solenoid plug, if you were looking at the plug, either right or lhd side.

ie. Pin 7 RHS of solenoid plug, Pin 8 LHS

THANKS:thumbup: