Help is here! I dare the hard problems!

IHI-RHC7

"The Boss"
Apr 1, 2005
1,310
0
0
40
Oregon
Hey bud, I'm installing an Alpine deck with some alpine Type S seperates with a V-power amp under the seat like the factory 90+ cd equipped cars. (this is a 92)
What I need is the wire colors from the deck to the amp, which color goes to which speaker, and so on. I've foud the TEWD pic, and it is no help.
Page_132.gif

The problem I'm having is that the light green wire is missing between the amp and deck, which means that I can't assume that like colors go together, since lg has nothing to correspond to... Any help would be appreciated.
-jake
 

estrellainc

Supra Agent
Dec 26, 2005
174
0
0
mississippi
Hey boss!
I am on the road. (bounty hunting).

I should get home early morning. I'll post an answer then.

ps 6000 miles on da supe since the rebuild. your advice was greatly appreciated
;)
 

estrellainc

Supra Agent
Dec 26, 2005
174
0
0
mississippi
sorry...
ive been on da run longer than i thought.
are ya tryin to make sense of the connect wires to the original amp from the radio?


when i looked at the diagram i saw that there is good detail of what the post amplifier wire colors do, etc.

between the cd and deck, the colors are defined but not the function of each separate wire.
i found this in the manual...

coupled along with...

means...
a) the lg wire belongs between the speaker and amplifier and is the #1 wire for the front right speaker. as you said "the light green wire is missing between the amp and deck..."

there should not be on there.

on the other hand, from the diagram i spy...
ampwiresrn0.jpg

(tryin my best to decipher)
1) P (pink) is powered from the dome fuse
2) V (violet) possible speaker candidate
3) L (blue) goes to the auto antennae motor?
4) SB (???) is also a possible speaker output.
5) W (white) is also a possible speaker output.
6) G (green) is also a possible speaker output.
7) O (orange) connects to the auto antennae relay?
??? hey, 8 is skipped.
9) BR (brown) gets power from the 7.5 amp radio fuse in the box.
10) B-W (black, white) is a possible speaker output.
The last four are also a possible speaker output.
11) GR (gray)
12) Y (yellow)
13) B (black)
14) R (red)
save the pics for ref
hope it’s a start.
 
Last edited: