FIPG / RTV tutorials?

[NexiusEvaro]

hey guys

was going to put the water heater hardpipes and the water pump elbow back on then the turbo oil hardlines...and start reassembling...

anyone have any tips or links for doing good FIPG seals for these junctions?

did try a yahoo and SM search and couldn't find anything that talked about how much to put down, what side of the junction, or manner of application to insure a good seal... kinda deep in here and would hate to break it all back down to this point due to a leak

thanks

nex

 

[Yellow 13]

Its pretty simple, just put a little on a smear it around. I spread it around to about the thikness of a normal house key. Just try and keep it away from the inside of wahatever your sealing, so when it compresses it doesnt block the passage way.