exhaust choices/options?

[Clip]

birthday is coming up and i'd like to throw an exhaust on the supra (without paying $500). it's NA right now, so i'm going for a 2.5 inch dia. i know mdc has a DIY kit, but i still have to find a muffler and any of the brand names really push the price tag up again. does anyone have info/advice?

ideally i'd like to look stock but have a deeper note (like my gf's aw11 with hks exhaust).

anyone want to share their setup?

 

[SupaMan]

stock look with a deeper note n/a exhaust........pacesetter catback comes to mind.

 

[Clip]

iirc, hks made a 3" with a stock-looking muffler. don't remember the name, and don't remember if it came in 2.5" either. does it?

 

[MK3Brent]

Come by the house!!! bring plenty of pipe and I'll whip ya up somethin fannncyyy. :-D

 

[Clip]

damn, brent. NorCarol isnt that far at all. prices?

 

[MK3Brent]

supply the pipe!

 

[themadhatter]

lol where was this offer when i needed an exhaust lol

 

[Clip]

haha, i need a place to get pipe. i've got a gas mig setup and i can weld, but i need a mandrel bent pipe source and a good muffler.

 

[Jaguar_5]

I purchased cooleze 3" pipes + a magnaflow muffler, i can't remember the exact model right now (if you search my thread you can probably find it) but it was 3" in, and dual 2.5" out, it is a flow through design (no baffles to go around) It sounds real nice and deep, i'm running it on my NA right now, it is a bit loud though I'd recommend getting a resonator as well if you're concerned with that.

 

[starscream5000]

Pacesetter, cheap, gets the job done, is the size you want, looks stock....

What else do you need?

 

[suprahero]

Brent, I'll take one in 3.5" please. You can mail it to 159 Marklund Rd. Sumiton Al. I'll have paypal ready........:biglaugh:

 

[Clip]

do the vendors carry pacesetter

 

[MK3Brent]

Brent, I'll take one in 3.5" please. You can mail it to 159 Marklund Rd. Sumiton Al. I'll have paypal ready........:biglaugh:

Just check out my site and swing on by. :icon_bigg

Brent A. (Fabrication)

 

[noah89t]

clip, you can get mandrel bends from jcwhitney

 

[starscream5000]

do the vendors carry pacesetter

Don't know, but I've got one up in the attic as it came with my car unistalled, but shipping that would be a pain for me

 

[WhtMa71]

Probably only need a couple mandrel U bends at the most.More than likely you'll just need one, and like 10ft of straight piping and a muffler, maybe a resonator. Im sure Brent can hook you up.

 

[MK3Brent]

Usually two 90 degree bends are enough, the 180 U bend pipes are usually too wide to make fit right.

At least in my experience.

I'd recommend the pipe that Summit sells where one end is flared out. This way you can slip one end in, and slide it around till you find the perfect angle, then mark it with a marker.

 

[Boosted833]

I got an N/A. I had a muffler shop do a 3" straight pipe (and it is the straightest possible piping) from the headers back with 1 resonator and a HKS Hi Power Muffler. Trust me its a very nice low note at idle and its a monster at high rpms. -Note- You can still hear the radio while doin 6000rpm and thats good enough for me =]

 

[91 mK3]

iirc, hks made a 3" with a stock-looking muffler. don't remember the name, and don't remember if it came in 2.5" either. does it?

i have this exhaust and i like the sound of it. it looks stock but it has a soft rumble to it. i dont know it it came in 2.5" as another option because myne is
3".

 

[MK3Brent]

HKS sport.

http://www.suprasport.com/MA70-HKS-SPORT-Turbo_p_44-24.html