distributor trigger wires

[5uprahboy]

hey ya'll i need to know in the 7mge what the trigger wire colour is and what colour i should be using for "sync"

this is for installation for a stinger

thanks
(suprra_girl)

 

[Nick M]

IGT- Ignition trigger, or timing. Either way.

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=56

You need an EWD for your year to be certain on the color.

 

[5uprahboy]

IGT- Ignition trigger, or timing. Either way.

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=56

You need an EWD for your year to be certain on the color.

Thanks for that! So IGT goes to the trigger on the distributor? What about "sync" and which should go to the ignitor?

 

[5uprahboy]

Thanks for that! So IGT goes to the trigger on the distributor? What about "sync" and which should go to the ignitor?

I've been suggested to use NE as the trigger for the distributor, G1 as the sync and IGT for the ignitor

Does this sound right?

 

[Nick M]

Are you putting in an aftermarket distributor? If so, why? Since I don't know what a stinger is except as a hand held, high probability SAM.

 

[5uprahboy]

Are you putting in an aftermarket distributor? If so, why? Since I don't know what a stinger is except as a hand held, high probability SAM.

No I am using the stock distributor and ignition system.
A stinger is this: http://www.enginemanagement.com.au/product_info.php?cPath=23&products_id=107