Did I get the wrong shocks??

[cactus_mole]

Just wondering if they sent me the wrong ones. Because they dont look like the stock ones and the new springs I got for them done fit on them.

The one on the left if the rear, and the one on the right is the front.

 

[AF1JZ]

Check the part numbers.

 

[bwest]

you need to pull the mounting perches off the stock shocks and then put them on the koni's

That will help you out with the springs

 

[cactus_mole]

The shocks that are on there now are KYB's and the spring plat thing is welded on there. Should I get them off then just pound them on the koni's?

 

[chopstickz]

the smaller ones are the the front arn't they?...

 

[cactus_mole]

the smaller ones are the the front arn't they?...

I dont know I was just guessing...they didnt tell me in the instructions...so.:dunno:

But nVm I got them off...I thought it was welded on there but it came off with the good o' hammer....
Thanks

 

[suprageezer]

are these what you need?

http://store.summitracing.com/egnse...0+4294907597+4294924930+4294925130+115+400286

 

[bwest]

Geez -

those are for the tops. He did the right thing to the kyb's

 

[suprageezer]

Bwest, gotcha thanks wasnt sure what they were I just saw them one day when I was scrolling thur Summit, I haven't had to do anything to my suspension yet so I'm clueless till I buy me a complete front frame assy and rear frame assy to rebuild in my garage then bolt on.

 

[bwest]

NP - I had to do the same thing w/ my Koni's after switching back from a set of JIC c/o's. If I was to do it again, I would go with Bilstiens, as getting the adjustments accurate on the Koni's without a shock dyno is impossible.

Good luck with the sub-frame search - thats going to be quite the project.

 

[suprageezer]

Here at the local pick a part they want 250 for each subframe and they remove it for me. A great price to be able to garage build then bolt them on for me.