I am doing a harness cleanup on my aristo harness , that I'm using for my 2jzgte supra swap . I'm keeping powersteering but getting rid of a/c , stock twins , going with r154 5 speed (getting rid of automatic connectors) , basically I'm going to prune this harness down some and this was step one. Here are some pictures, it took me about 3 hours to strip all the sheathing off my harness , and during the strip I found 3 wires that had been cut , and found a few missing connectors . I'm sure I will have more questions to run by the pro's here and I took lots of pictures during the stripping , so a write up is possible , but wont happen till its done and the engine is running on the harness. The tie wraps are temporary to hold stuff in place till I'm done pruning and rewrapping... I am looking over the supra.nl write up , I printed it out and read it about 15-20 times . that pile of trash below was at least 6 inches deep and 2 feet by 2 feet pile , I think the harness is pretty clean looking and when I'm done it will be a beauty ,enough talk for now here is the pictures...
naked harness
The pile of garbage after the harness stripped
naked harness
The pile of garbage after the harness stripped