87 to 89+ turn signal conversion, HELP!

[Kylar27]

Hey guys, looking for a little help here. I tried searching but couldnt find any info.

I am converting to 89+ front end and changed out the bumper, nose and turn signals. Now the 89+ turn signals have a different plug then the 87's plug coming from the car. I know people must have done this swap before. Does anyone know how to wire these puppies up? Should I bother trying to get plugs or just hard wire them?


Thanks for any help in advance :burnout:

 

[ValgeKotkas]

I can't see any problem in hardwiring, cause the bulb can be popped of itself, so if you want to take the signals off(sometime in future) you can just pop out the bulbs instead of connectors.
Though that's my do-not-know-anything-about-electronics opinion:icon_bigg

 

[Kylar27]

ah, I see what you are saying. I'm an idiot, I already sold my 87 turnsignals with the bulbs and wiring. I should have kept them and just switched the wiring over into the 89 signals right?

well since those are gone, anyone know which wires do what on the 89+?

 

[CRE]

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=070
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=63