Search results

  1. MarkIII4Me

    7mgte wiring harness plugs

    Thank you for this. In the process of modifying and relooming my harness now. Your pics are going to be a BIG help.
  2. MarkIII4Me

    Oil from exhaust after forged rebuild + tune

    ^ This. Had a similar issue that turned out to be a cracked #4 intake valve guide.
  3. MarkIII4Me

    Thank you!!!!

    I' m disappointed to see that some of my longest, most informative threads could not be recovered. Still glad to see the site is back up with whatever content could be salvaged.
  4. MarkIII4Me

    What to do- turbo seals shot, smokes on deceleration

    Check your turbo and intake pipe for oil. None there? It’s your valvestem seals. Mine went bad from sitting over 10 years and engine had less than 3k mi on it. Originally I thought it was the turbo, and there was oil in the pipes. Had it rebuilt, no more oil on impeller wheel or in intake pipes...
  5. MarkIII4Me

    What did you do to your supra today? Pics

    I diagnosed and resolved the spark blowout issue a couple days after picking the vehicle up from the tuner. He was saying the power dip was likely due to the restrictive factory exhaust manifold, however, I have never seen that power drop on any of my past dyno runs. As soon as I drove the...
  6. MarkIII4Me

    ***SM Member Horsepower List***

    My 7M just put down 516whp. This should bring me from #21 to #15. :icon_bigg Can I be updated on the list? -100hp dip at 6200rpm was due to spark blowout and has since been resolved by tightening plug gap to 24. https://www.youtube.com/watch?v=ZmsoiVwJuBI
  7. MarkIII4Me

    What did you do to your supra today? Pics

    What I did was finally get the Supra back. After 5 months at the tuners, the Supra is home. Pulls like a freight train and will break traction in 2nd and 3rd under boost with 275 Gforces on the rear. Dyno video was terrible quality with crackly audio, so a dyno chart will have to do for now...
  8. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    ^ As far as I know, a complete Turbonetics Bolt-On will have their "T" logo on the center section and turbine housing. Compressor covers have "Turbonetics" cast into the front. Anything else is likely a Frankenstein of some sort from multiple manufacturers. These turbos are old, things break...
  9. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    Pretty sure mine's running the .68 turbine housing. Can't find the Turbonetics catalog anymore. I came across it a few years ago online.
  10. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    I’m not sure why they never list AR’s. Other than an old Turbontics catalog I came across, I’ve yet to see any specifics. I do know the two most common I have come across are .63 and .81.
  11. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    All that had been discussed is that your turbine housing is Turbonetics. Your center section is not based on the type of oil feed lines yours uses and the compressor cover is clearly not Turbonetics either.
  12. MarkIII4Me

    1990 Turbo Supra with 3k miles for sale?

    Wow over 30 bids and up past $20k. Can’t imagine how high it’d go with a gray interior.
  13. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    Once again, if the housing has a Turbonetics logo, it’s Turbonetics. Turbonetics did not produce the housings until after HKS discontinued their 7M Sport Turbos. So there’s no way HKS could have used Turbonetics as a supplier. Reg didn’t remember seeing the “T” logo on his turbine housing...
  14. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    You've posted a scan of an itemized 18 year old email from Reg Riemer to the previous buyer. Not from Turbonetics and I see no shipping invoice from HKS. Not sure what you're trying to prove or disprove. It's already been discussed that the hotside is a later cast from Turbonetics, not HKS. As...
  15. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    ^ So you didn't receive the turbo directly from HKS and the part number is not on the turbo? :sarcasm: I stick to my previous statement.
  16. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    My Turbonetics Hifi 62-1 bolt-on crossed another milestone. Tuner just texted me that it put down 516whp at 21psi on pump gas and a rich 10.9afr. He also said that his dyno reads low. Not too shabby for a 20 year old design. :boink: Should have the dyno video and graph soon. Will post it up...
  17. MarkIII4Me

    The 7mgte Bolt-On Turbo Catalog

    HKS cast the original ct-26 style turbine housing for their bolt-on turbos. All others from that point are copies. First was Turbonetics who offered them in several different A/R's. If your turbo has a Turbonetics housing, then it is not an HKS turbo. Perhaps the compressor and cover are, but...
  18. MarkIII4Me

    Bolt on Big Brake Kit For around 300$.

    Sounds like you’ve already made up your mind. :dunno:
  19. MarkIII4Me

    Bolt on Big Brake Kit For around 300$.

    ^ I see no reason not to disassemble them. Probably need to pull the seals too since most powder coatings are baked on at high temp.
  20. MarkIII4Me

    quick brake question: easy answer

    Not sure about availability separately. I scored a rebuild kit that had the rings, boot and seals for under $15. Pretty sure it was oreily’s.