Search results

The only thing I haven't done is split the intake manifold still cannot find those plugs/wires cut or otherwise

Okay i have unwrapped the 1jz harness that runs the igniter and the tps cannot find the wires cut or otherwise to save my life I'm going to have to wire in the efi mrel to the b1 body plug and run a separate relay for fuel pump I guess I just wanted to keep it as stock looking as possible I...

Okay i have unwrapped the 1jz harness that runs the igniter and the tps cannot find the wires cut or otherwise to save my life I'm going to have to wire in the efi mrel to the b1 body plug and run a separate relay for fuel pump I guess I just wanted to keep it as stock looking as possible I...

Thank you for your input I will try this and use the information wisely.

Also no hydro fan and I wired the alternator how it was before just cut off the round plug extended the wires to passengers side and soldered the wires. I don't need the alternator part of this wiring only need the efi relay control portion and the fuel system portion

The only problem with that is my 1jz is from a soarer at least ecu is from a soarer and it doesn't have that 12 pin plug or 12 wires that have been cut from a plug... this is why I'm at a loss as to what to do.

hello I am in need of clarification I have been trying to wire this engine 1jzgte non vvti into my 86.5 ma70 supra for the past month and have completed most of it with the help of the diagrams on supramania. I will include pictures but my problems are as follows. 1.no power to fuel pump or fuel...

Hello from Arizona, just curious if I could get a little help from you with wiring all I need to know is which wires does what on the body side of the engine to body connector for an 87 naturally aspirated supra I'm doing a 1jzgte swap and the wiring has me stumped. I've looked at all the wiring...

I already have that info, I will just figure it out. Trying to save some time. Thank you for trying to help.

I just need a small bit of help need the pinout for an 86.5 naturally aspirated supra chassis yellow plug for engine harness to body connection. If anyone has this info please help. I have scoured the forums and Internet at large and come up empty even the tsrm at .Cygnus doesn't show anything.

Thank you for the insight a co worker of mine told me about psc motorsports they sell the 3/4 inch Goodyear power steering feed hose for $3.20 per foot. I think I'm going to go that route because it should be flexible enough to maneuver around the motor mount brackets.

Hello I have a couple of questions about the oil return/drain hoses from the turbos on the 1jzgte what are you guys running? and are there any options besides running A/N fittings? What size power steering hose do I need to re-use stock fittings? Trying to do a build on a severe budget. Thank...

Engine mount brackets: Do the pre 89 7mgte brackets fit the 1jz block or do I have to buy the custom brackets? 86.5 mk3 1jz swapping

Thank you I will be trying to wire it in a week or so

Is it possible to use the body harness connector from the 7mge engine side to wire the 1jz? If so has it been done before? And which pins need to be relocated to where? Thank you all in advance for any help/guidance is much appreciated. Car 1986.5 mk3 Engines 7mge blown rings 7mgte not...