Search results

I inspected the brakes, it has nothing to do with the brakes, the brakepads are brand new. When you brake or accel the engine "could" move around in the engine bay hitting something, no clue what though. it also seems to be RPM specific... Very wierd! I made a video of the sound today, ill...

Hello guys, When i start the car in the morning it runs very rough possibly due to some moisture somewhere, but thats not the problem. The problem is, as soon as i set in motion I sometimes hear a scraping sound coming from the front of the car. I can also feel it in the gas pedal as if...

Hehe, thanks for the answers, I take its the same size on NA and Turbo? #2 No im not relocating, just adding this so i can add a pressure and temp sensor.

Hey guys, what is the threadsize on the little oil-filter "tap" and well, the oil-filter? I purchased a flange to put between the block and oil-filter but it seems to me that it screws into the oil-filter very loosely and it will not really attach to the block. It seems to me I will have to...

Sounds to me as if you have a a leak in one of the hoses. I have the same problem. It spits servo-fluid on my downpipe :p The whiney noise is a low-fluid indication. Air is getting in there from someplace, thats why it foams. It could also be your steering rack that leaks fluid, check for wet...

I will try that one of the next days.

Hello IJ, -You are correct, the speed signal is somewhat bouncy, did you just replace it with a new stock unit? -The WG spring is the stock one on the CT26, are there different versions of it? Michael

Hey there, NC is open as it is stated in the manual. The problem was actually a leak in a T-fitting that i used for both my aftermarket boost-gauge and the unit. Both items did not see the proper boost levels. The stock one went way over and that made me recheck the connections. I can only...

Ill try that, thank you. Ill be back if it doesnt work ;)

Hello, Is anyone an expert on these things? I connected mine correctly, at least I think so. 2x ground, 1x rpm, 1x speed, 1x power, 1x throttle. It is possible to show all values from those 4 inputs so everything should be wired correctly. -The manifold boost lines are run to the same...

It will, run, idle and run emergencyprogramme without AFK in, it will give you a code though and run really really rich. At least my euro-supra did that, took 2 days before i took my act together to bother checking what the blinking of the engine lamp meant :p Michael

5th gear: 2000 RPM=90 km/h=56mph 5th gear: 4000 RPM=180m/h=112 mph 3nd gear: 2000 RPM=50 km/h=31 mph (aprox.) 4th gear: 6000 RPM=210 km/h=131,5 mph 4th gear: 2000 RPM=70 km/h=43,5 mph You can easily divide/multiply your speed since 2x rpm=2x speed in same gear. I hope that helps...