Search results

  1. chevyguyjoe

    Red Supra build 500~WHP

    Is an HX35 the one for a 12 valve cummins?
  2. chevyguyjoe

    What did you do to your supra today? Pics

    Last time I drove it in february I burnt some wiring on the passenger side of the engine. Just got around to temporarily redoing some of the wiring and got it fired up today to see if I could find the cause. Sounds like cracked exhaust housing on the CT26.
  3. chevyguyjoe

    The Small Questions Thread

    Sounds like you need a 2.0mm head gasket. Id use the cometic 0.080" thickness if you intend to keep stock compression. http://www.shopengineparts.com/productdetails.aspx?emid=651&cid=24&pid=949&vtype=Import+Auto&make=Toyota+%2f+Lexus&model=7M-GTE+3.0L+87-92+2054cc&type=engine
  4. chevyguyjoe

    What do these plug into?

    Same two plugs have been disconnected on my car since i bought it.
  5. chevyguyjoe

    The Small Questions Thread

    I agree. Just looks like dirty oil.
  6. chevyguyjoe

    New Head Gasket Questions

    Personally with my Cometic gasket and ARP bolts, I boosted but only stock boost until the re torque. The ARP bolts came with a paper that had the torque spec and when to re torque.
  7. chevyguyjoe

    Brake Line size and thread

    Cant you just take one of the old lines to the parts store and match them up?
  8. chevyguyjoe

    7mgte cams

    No, because im a poor redneck. No but seriously. Mine was scored from what looked like lack of oil, but in the 10,000 miles i owned the car prior, i had not run it low. So it had been running with the scoring for a while. The machinist said he didn't believe it would be enough to make a...
  9. chevyguyjoe

    7mgte cams

    My cams were scored. Some fine grit sand paper cleaned up the journals nicely. Machine shop cleaned up the head and caps at no cost with my head machining.
  10. chevyguyjoe

    head gasket question

    The one Driftmotion sells is indeed the OEM Toyota headgsket with the updates. I have a brand new one i didn't use if you are interested. Check your pm's. Personally i did like everyone says dont do, and i used a Cometic mls gasket on an unprepped block. I think the previous owner had it...
  11. chevyguyjoe

    standard steering wheel on air bag car

    My 90 has airbag and separate cruise stalk.
  12. chevyguyjoe

    one piece driveshaft advice

    The best i could gather was the majority of 5 speed turbo cars had 3.73 gears.
  13. chevyguyjoe

    one piece driveshaft advice

    Im going to bring it back to something non engineers can understand. I mentioned Silverado's have a one piece aluminum drive shaft earlier. These trucks are top speed limited to roughly 100 mph. With the factory size tires and the shortest available gear ratio (4.56), the drive shaft will be...
  14. chevyguyjoe

    one piece driveshaft advice

    Some 99-08 extended cab Silverados come from the factory with one piece aluminum shafts.
  15. chevyguyjoe

    one piece driveshaft advice

    ^ Not entirely true. I come from the S10 world. The long wheelbase chevy s10 is 122.9 inches. Many on road guys swapped out to a one piece drive shaft. This required modifying the cross member with the carrier bearing in it, and often the floor as well. But it would result in a much simpler...
  16. chevyguyjoe

    Headgasket

    Its a composite gasket that compresses when tightened down. Its made completely differently than a multi layer gasket.
  17. chevyguyjoe

    Identity Crisis

    I think i saw that on craigslist once.
  18. chevyguyjoe

    The Small Questions Thread

    Most likely just the battery. A shorted battery can render the alternator ineffective.