I bought this wire harness a few months ago wanting to run a Aristo ECU on my 1.5 setup in my SC300. The guy that sold it to me told me it was from an Aristo. I bought a jumper harness instead and now Im in the process of selling the this harness but the a buyer told me it is not from an Aristo...
I posted this up in the other forums but wanted to get your opinoins.
I purchased a jumper harness for my 1.5JZ swap to run a Aristo 2JZ ECU in my SC300 but the car is running like crap and I have a few questions. First off its throwing three DTC's- 21,31 and 47 which are the O2, Map and sub...
Hey all, Im still having issues with my 1.5 build. The car is driveable now but it sputters pretty bad when I get on the gas, this only happens when the car gets warm/operating temp. When I gently accelerate the thing drives smooth but it wont boost over 5lbs. But when I boost up to 5lbs the car...
Is the bottom radiator hose suppose to be as hot as the top hose? I had a Freeze plug blow outta my block about 2 weeks ago and now Im thinking that this coolant issue can be the cause.
I got the engine back in and running but noticed that the cooling system is acting strange.
-The...
I get a delay when I try to accelerate. The car would stutter a little then pickup speed but its kinda rough, not a smooth acceleration. I tried adjusting the TPS, helped a little but what else would I look for?
Theres no vaccum leaks or boost leaks, not that I know of. Everythings hooked...
Im running a 1.5JZ with a GE block, just got it started today and ran it probably 2 miles- had a small fuel leak so I had to park it. My question is, when I had the shortblock overhauled(new rings, rod bearings, main bearings, cleaned off pistons) I didnt have the squirters added to the GE...
I want some of your opinions if you had use these products before, first time I ever used one. I ordered a Oil COOLER sandwhich adapter thinking its the same as the oil filter sandwich adapter for my swap. I had it installed, used one of the ports on the adapter for my twins. Got the car running...
After replacing the front main seal today we started the car up and it sounded great for about 2 mins then we had a knock and the car stalled. I thought it wasnt anything so I fired the car back up and get a knock, we let it run for a few minutes to inspect where the knock was coming from.
A...
I been having problems with my bodyplug harness wires, there are 2 wires that are disconnected and Im trying to figure where they go. Green wire is one of them. When I test for continuity, I get 4.7 volts. That wire is going to the engine but its Tee'd off going back to the main ECU into pin...
Is the bolt with the nipple below it that Im pointing to in the pic a coolant line or a oil line? Is it a feed or return? Im going to run stock twins and need to tap it in somewhere.
A buddy of mine gave me this and said it had a cracked block, he didnt want to deal with it anymore. It was in his SC and had a leaking coolant line and he drove it some, not sure for how long or how far.
So I started to tear it down and got everything disassembled but cant tell if it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.