Search results

I recently finished putting an R154 in my 87 NA. I cut the wiring harness off the old auto and spliced in the reverse light pigtail from the R154, and connected two other wires as the neutral start switch. I can't find the picture that someone posted here before. Then you disconnect the plug...

I just finished my 87 NA auto to R154 over the weekend. I have an 88 GTE as a donor car. All I bought to do the job was front and rear transmission seals, and a full length clutch hose from Driftmotion. A few things I found out when doing this job. Auto and manual harnesses are the same as far...

BIC puts a divider plate in some of their downpipes. Can a divider be welded in any turbo(CT26) itself if a divorced downpie is used or is this something BIC does for certain turbos only? If this is something common what is the mod called?

27 mm socket to remove the stock oil filter/oil cooler adapter (when doing a full flow oil system) from the turbo engine, and a 24 mm socket to replace the NA filter stud. I bought both at Advanced Auto for less than $15.

Sounds good to me. Looks like the food there will be fine. I think I have to work at least half a day Sat now too. I will call or text later so you have my number. Chris

I know of a number of parks that have pavilions with grills. The Georgia state parks require a $40 deposit for a pavilion. However, its only like a dollar to go in. Black Rock and Tallulah are nice places. Tallulah has plenty of parking, bathrooms, picnic tables and is on the "lake". Blackrock...

I would like to do this as I live in Sky Valley so it's close by. Here's a link to the theater. http://www.tigerdrivein.com/ I'm sure we could find more Supra owners from around the area too. The ones I met a few weeks ago at the Roan Mountain car show were from north Ga, upstate SC, and...