Search results

Ya I know that. I'm not getting any codes, will check the gaskets tomorrow and see how everything is. I have a feeling the manifold to port gasket isn't sealing properly.

Would a manifold leak cause this? or are you thinking crack?

I have an interesting equation here. The car is originally a CA car but the engine is one of those out of a Cressida from Japan. I rebuilt the engine 50k ago and put all the CA smog stuff on it so it would pass visual. It kept throwing a code saying EGR but I replaced everything twice and...

If the tank is really rusty or something then you should just get a new one. If you are looking for a mild clean then you can use some sort of solvent to take of some grime. If you are looking for a hardcore clean then you can try muriatic acid but this stuff is toxic. Other option is take it to...

It's not an exhaust leak. It's coming from the back of the head and is consistent with the rpms. It's a different sound than exhaust leak.

So my car hasn't been running very well for about the past week and today I go out with my dad to try and fix it. About 1 minute after starting the car there is some noise that's louder than a tick and but not as prominent as a rod knock. We listened for the area and it sounded loudest towards...

Whenever I see that on the inside of my oil filler cap its a BHG. I always wince when i take it off for an oil change.

... your car is worth more in parts than assembled.

Alright, I'm in the middle of doing this conversion and I have 2 questions. How do I get that Green tinted screen in front of the analog screen out? And where can I get an analog that isn't green?

Alright, my car has a rebuilt engine with 10k on it and new: Autozone Clutch Set Up Slave Cylinder Master Cylinder Brake Fluid The problem is that after I drive up the incline of a freeway for awhile it starts to make an odd vibration or noise. If my foot is on the pedal half way going...

That's about what I paid for a valve job.

When I bought mine there was an O2 sensor welded in on pipe 3 I believe so there was no problem there. However i do think you have to extend it if it is down by the CAT.

I'm running with an NA and a pacesetter header. I say that you should go for it if you plan on keeping the 7m. I have 2.5" catback with the header so it sounds real nice without being cop attracting. You will feel some power increase and even fuel efficiency too. Nothing too major but I'd say 1...

Thanks for all the help Supraguy. Alright, I came across this: http://cgi.ebay.com/10-WHITE-DIFFUSED-LEDs-700mcd-3mm-led-leds-FREE-RES-/190350626345?pt=UK_ConElec_LightingLEDsStrobes_RL&hash=item2c51c80e29 Should I grab 30 of those?

Alright so I'm looking for the correct mcd range now but what size and angle should they be? And how many exactly? I really only want to have to do this once.

Thanks for the heads up. What is the correct luminosity, angle and size that I need to get?

I totally overlooked that. Are the prices going to be about the same or am I going to get gouged? I think I'm going to head to one tomorrow and see what I can get.

Where did you get your LEDs at? I was looking at superbrightleds.com but could only find T-1 3/4 size. If that is right then what viewing angle should I get? Here's the page I'm looking at and I want to get something that will match Cool White as that's what my gauges will be. Thanks for all the...

What has to be soldered? I would think that you just need to pull out the LEDs and plug in new ones. Where do you get that particular size? and what size is it? I got lots of questions but no answers haha.

What Scion is that off of? a new one? That looks like it could be stock for a Supra, very cool.