Search results

im puzzled as to how people lock their keys in their car in the first place and the need for the anti-lockout feature. if you get into the habit of locking the car once you are outside it, you will never lock your keys in there as you need them with you to lock the car in the first place. i...

the centre console piece has a rubber on it that can be removed, but it has a lot of holes in the abs plastic that the rubber was keyed to. if you do remove the rubber, you will have to fibreglass/carbon fibre cover it. the rubber was about 2mm thick if i remember correctly

i rebuilt my r154 without bearing pullers. i used two plates of steel but one had a slot cut out of it to slide nicely behind the bearings. attached the plates together with two threaded rods with nuts and used those to pull the bearings off. putting new bearing on, i used the old ones on top of...

+ Caps i had this exact problem with my 1j stock ecu. only thing with mine was that the cap had leaked and shorted out onther component, there was a nice burn on the circuit board.

of the three wires, one should be the warning light for the dash, another tells the alternator to energise the rotor (when the car is turned on) and the third is the voltage input which is used to regulate the power to the rotor. I cant remember which colour each is but you need to connect them...

the first one is a map sensor, either for the ECU or the boost gauge. the second is an ABS sensor, hence the grommet near the end where it comes through the body.

the BC cams will fit but they only have them for the NA vvti. I got mine custom ground with the TT non-vvti intake profile giving it bigger lift etc. didnt cost too much more.

the output shaft seal should be included in the rebuild kit

well if one of your rear wheels can fit over the bbk at the front, the mk4 spare will be fine as that can fit on the back over the mk4 tt brakes. the wheels will be imbalanced left to right, but who cares, its just to get you somewhere to get the original fixed.

i have the file on my computer at home. i can email it to you when i get home if you like. the original location i downloaded it from doesnt appear to be working anymore.

if you're referring to the component schematic (resistors, capacitors IC etc) I doubt toyota would have released any version of it. if someone had a lot of time to spare, it may be possible to recreate it, but i highly doubt anyone would do that for free.

Hi everyone, through i would make in intro to get the info bar off my screen saying that non posters get deleted from time to time. Anywho, i am an aussie supra owner with a black JZA70 hardtop. currently customising the interior and almost done except for installing a computer and...