Search results

i have all three idiot lights on my dash. i beilieve they are all related because when the little capacitor looking thing on the back of the alternator the problem was intermittent. now that the wire broken completely off and it is unrepairable, i have all three lights on the dash. I believe...

Here are a few pics of my spare turbo engine. My question is are u supposed to be able to a flashlight's light shown thru the water neck to the back of the block.

I was able to start and run the car two days ago. I ran out of gas. Now I cannot get any fuel pressure like the ump isn't working. I have tried jumping the diagnostic block that did nothing. I tried running power straight from the battery to the pump nothing. I figure that the pump is garbage...

is this a simple splitter or a proportioning valve i know there is a mean leak here going to be replaceing the lines but i don't know what the ?splitter is this is located between the gas tank and the rear end

I am rebuilding a ge for na-t. When I pulled the ge motor the motor shredded (round rubber)shredded, my question is I have mounts and brackets off my 89 parts car(square style), can I use these to bolt the motor into a ge 90 body. Basest on just looking at them side by side, the only difference...

I want to make sure all my replaced seals are good and set the timing before bolting up tranny and reinstalling in the car. I am not sure what exactly is needed to run it. I think the engine harness, ecu, radiator and fuel pump. After connecting the harness and getting power to the ecu and fuel...

I was rebuilding my 87 turbo block got it all cleaned up and ready to rebuilt. I was going to re-use my 90 ge pistons. The problem arose when I was mocking everything up just to make sure it all fit. I tried to dry fit the an pistons in the turbo block and an unringed piston would not fit in the...

well this past summer i got busted doing 130 mph on 95north going to the track in epping nh well i ran a poor 15.2 in the quater with a blown head gasket and a 1000 dollar ticket in my pocket well the ticket is paid but the head is still blown looking to get it all back together hopefully i...

i have a small crack in the line that comes off the valve cover to the oil pump doesn't leak oil but could it be causing drops in dramatic oil pressure

i installed the safc and pulled fuel from the curve and ever since i installed it i have been stalling. well ever sine i turboed my na car i have been stalling after i am in the boost. at cruise speeds id doesnt happen that often but the stalling still happens. at 120 mph this is causeing a...

what does the blue wire do and is a 2.2kh resistor gonna work can't find a 2.4 kh resistor

i have done the research and i can't find a diagram for the map sensor and the parts that go under the hood i would apprecaite the help i am running a na-t with ge eletronics pictures would be a gaint help thanks