Search results

I recently did a head gasket and turbo on my car. Ever since I got ti started it takes a while to start. Before it would fire right up and idle smooth. Now, it takes a couple times and it will idle real rough then smooth out when I give it a little gas. I replaced the head gasket, installed a 57...

I went to install my PTE 680cc injectors today and noticed something unusual. The o-ring on the top to the fuel rail fits snug but the bottom one to the head is very loose.Theres a about 1mm of play in it. Is there a special o-ring Im supposed to use or will it be fine when I bolt it on?

Does it matter which way you solder the wires together when istallin injector clips? If so which colors are positive and negative? My injectors clips wires are all white so I cant tell.These are PTE 680cc if it matters.

I was wondering what you guys with big turbos do to clear the evap canister. I got a precision 67 and the exhaust housing hits the canister bracket. I was thinking of trimming the bracket but I still need my spacer to clear the #3 runner to make sure. Do you just get rid of it? Do you relocate...

I was wondering if the crank pulley/balancer bolt is a right hand or left hand thread? I need to take mine off but cant remember which way it comes off.

Can the stock computer handle 680cc injectors in closed loop? I will use a safc for my tuning but the computer will compensate for my changes is my understanding. I will be running a sp67 and rather not go to a standalone yet. Will the maft pro handle these better then the lex and a safc?

Where do you guys get your injector clips? I can get some rc injectors without them and I know they wont fit in the stock ones. Can you guys help me out?

Is it really worth it to port the heads on a turbo engine? I have my head off for a MHG and some studs and thought I might try it while its off. Does the supra head really benefit from this is or is it a good flowing design. I have the #13 heads and the intake divider is almost non existent on...

Can the exhaust housing of a ct26 be removed without taking off the exhaust turbine. I removed the clamp and tapped on it but it didnt budge. I would like to port the wastegate but would like to take it off if possible.

I was leaving a resteraunt and I didnt see a speed bump and it hit my exhaust very hard. After that it started runnig real rough and didnt want to rev. It aslo started to blow white smoke out the exhust. I checked my intercooler hoses and they all looked fine. Could the exhaust lifted the head...

I was about to take off from work when I went to put it in gear and the peddle went straight to the floor. I left it in the parking lot overnight and got a ride home. I took the inspection cover off and the fork was hitting the pressure plate which I thought was bad. So I pushed it into the shop...

I was repairing my o2 sensor wire at my school and when I went to pull out of the bay my power steering was almost gone. I say almost because its not as hard to turn it as the engine is off. So what could have happened? I took it on the freeway today and it felt normal but when I got off it was...

I was wondering waht the max boost on a 60-1 ct26 was with all the supporting mods?

I am replacing the springs and struts on my car ans I ran into a snag. How do you guys remove the shock from the car? everything is off and the spring assembly is just flaoting there. Do I have to disassemble the spring and strut assembly to remove it? Or is there another way. Any help is...

I was wondering if anybody has some pictures of tha pass. side by the intake. I see two loose connectors and am wondering what they are for? Does it control the A/C? Im trying to get it working but i dont have power to the clutch so Ill keep looking.

I had some questions about my timing. I wanted to check my timing today so I hooked everything up and i noticed it was past 15.It didnt look like much so i dialed in the advance to see what it was at and it said it was at 35 at idle:aigo: . So my friend revved it to 2500 to see waht total timing...

I was wondering who uses a t61 turbo on there car? If so what are the spool characteristics and whats the max boost? thanks

I tried to make my car run better by cleanning the MAF sensor and the TB with some stuff i got at work. I got the MAF nice and clean then sprayed it down the TB. I went to start the car and of course it idle like crap for a couple minutes then idled fine. I reved it a little bit and it...

Well I think I found were my coolant went. Today when I was going to work from school I noticed a Puddle under the car. When I goe out of work I noticed another puddle under the car. It never overheated and I bought a new thermostat and rad cap. When I got hoe all of a sudden I here a hissing...

I was driving to school today and I noticed my car was runnign slightly higher then were it usually is (the gauge is usually perfectly level).I take my car to get something to eat down the street at break and when I get back theres a pudle under my car. I figured I should take it home so I get...