Search results

I just finished a 1jz swap in a friends mk3. When the car is running and not moving I can shift into all gears. When im in first and start driving I get locked out of second. I shift to third and now cant get back into second or first unless I come to a complete stop. I was thinking syncros...

Where is everyone mounting there 1JZ ecu's? It wont fit where the stock one bolts up. I tried tucking it near the pass door my the blower motor but then the glove box wont fit. Pics would be a big help. Thanks!

I just finished a 1jz swap into a mk3. The car will start and run for about 5 secs and then stalls out. If i try to give it gas same thing just stalls. no codes. I looked at the ecu and didnt see anything burnt/melted but im still not ruling it out. I need to check fuel psi still but just...

I'm installing a single turbo on a 1JZ and was wonder what you all were doing for the coolant ports. I bought high temp rubber caps from Mcmaster and think they will work but still questonable about them. The one near the DP worries me the most. I will put clamps on them and wrap the DP...

I'm keeping the a/c and am not sure where this single blue wire goes off the 1JZ harness. I have the a/c plug that comes off the harness plugged into the compressor but there is a single blue wire off the harness marked "a/c" Any ideas where this goes?

I've been doing a 1Jz swap in my friends supra and I'm not sure about a few things. 1. How does everyone hook up the main fuel feed? (The car is a 7M non turbo car orig) 2.The clutch slave cylinder on the w58 had a rubber line to it. The R154 is hard line. Do you just make a new line? 3. The...

Hey guys, I'm building up my friends 87 supra with a 1jz swap. I have taken a few pics of things I'm not sure where they go. I know this is the MAP sensor but where does it bolt to and what Vac line goes to it? Is this for the MAP sensor? This is the Accel cable. I've already...

I went to install the DM oil sender hose on my 1JZ block and the hose only screws in about one turn. That doesn't seem enough to me. Has anyone else ran into this problem? I may run a NPT tap into the hole to make it screw in more but figured I'd ask here first. Thanks!