Search results

I was looking at Dylan's page about his targa seal fix and i'm a bit confused. In this picture: http://gallery.sanitylapse.com/v/supra/Targa+Seal+Fix+10-28-05/DSC_0065.jpg.html he fills the drip rail with sealant. I thought the point of the drip rail was to channel the water from the...

What is the size/pitch of the alternator mounting bolt? Not the pivot bolt near the valve cover, but the long tipped bolt that holds its position in place. I tried searching to no avail. Thanks in advance!

I picked up a set of Ohlins coilovers today real cheap. They are non adjustable, and the only number they show on them is "Ct3-s0200-00". I'm not able to find any information on them. Pics: http://www.TeamFE.net/uploads/Ohlins/1.jpg http://www.TeamFE.net/uploads/Ohlins/2.jpg...

I put in my PWR Radiator from 935 Motorsports last week, and I pop my hood tonight to discover 2 fan blades broken off on my '87 turbo. I know how much thicker it is over the stock unit, and I had it sitting flush against the radiator support. The fan and fan shroud were purchased new from...

I bought an 89 non-airbag steering wheel and 89 combo switch off of ebay (different auctions). Turns out the previous owner of the wheel tried to wire it to a 3 pin harness to work on a pre89. Problem is, I plugged it in to my stock 3 pin combo switch and the cruise set buttons don't work. Since...

I've got a reman'd power steering pump waiting to go on my car, but looking at the TSRM: http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=SR&Page=45 I can't figure out where the vacuum lines (air control valve hoses) go on it. I know you have to reuse a few things from your...

I'm gonna be ordering a driveshaft from Jawsgear but i'm not at my car right now to get a measurement from the tailshaft of the tranny to the face of the differential. Does anyone else still have their measurement for their r154 driveshaft? It's for my '87 turbo. Thanks in advance.

I'm still trying to track down my power steering leak. Several months ago I replaced both pressure lines as well as the feed line on the bottom of the reservoir because one of the pressure lines cracked. Even with those replaced, I still have a leak. It seems to leak from the driver side dust...

Will a japanese 89 non-airbag steering wheel fit and be plug and play still in an '87? I know and have read the write up to get a US 89 non-airbag wheel to work since it has cruise control and horn buttons on it, but this japanese (it claims) one I found doesn't have the horn nor cruise control...

I know what my vacuum at idle and decel is supposed to be (and it seems it is spot on) but on a car who's only mod is intake, how much pedal is needed to make it hit 0? I know it depends on the turbo size, but other cars i've driven when you were even lightly on the gas there was 0 vacuum/boost...

I just got it back from paint 2 weeks ago, and finally took some solid pictures of it. The progress thread is here: http://www.supraforums.com/forum/showthread.php?t=367386 has pictures from when I bought it wrecked until it went in for paint. You might notice a few things gone from the nose...

I know this is a cross post from sf, i'm sorry but I never got any good answers! Problem: When I turn the key off and take it out, the car still has accessory power (cd player, clock is on). I do have a turbo timer (with harness, I didn't just splice the wires), but even after it shuts off...

I did search, but couldn't find this specific answer. If you bypass the bvsv and just have the vacuum line run from the charcoal canister to the throttle bad, does this 'cause any issues? I know the BVSV opens at a certain operating temperature, so if the gas vapors are always entering the...

I searched sf and sm as well as the tsrm and couldn't find an answer: What are the sizes of the bulbs that go in the front side reflectors and the rear side reflectors? I bought all new trim and am painting the car so i'm going to get new bulbs with it. The problem is i'm currently 45 minutes...

How much gain with would an intercooler of this dimensions: http://img.photobucket.com/albums/v669/oldsmoble442/Picture270.jpg give over a stocker? Mine has a ding in it from the old owner and rather than buying a replacement my buddy has that one in the picture.

I know i've seen huge threads on this before but I can't find anything with the search (sorry!) I am wanting to put an 89+ bumper on my 87 turbo, do I just need the bumper as it will bolt right up? Or is there mounting brackets underneath I need... and will my stock '87 header panel work...

Where can I find one of these? They are only available to buy when you purchase a wideband? 'cause i'm still on the stock o2 sensor and was wanting to use a PDA to log knock count, rpm, etc. I searched and found nothing :cry: Edit: I finally found something on sf that our ECU doesn't output any...

I can't for the life of me find the write up on how to put a dsm bpv on the 7mgte. I think I have a leaky bpv and I have a dsm one handy that I want to try and put on while the car is getting the other stuff done to it. I know they don't like ~18psi or more very well, I won't be running that...

I'm doing my turbo timer finally and was wondering how to get to the harness coming off of the ignition switch. I searched and somehow found nothing. I know, silly question. I thought i'd ask before I take things apart I don't need to. Thanks in advance!

Is the harness for the headlight motors the same on -89 and +89? I searched and didn't find an answer. Thanks in advance.