Search results

Some idiot ran is HHR -----WITHOUT OIL----- locked it up and brought it in to the shop a few days ago. So I was notified today that I would be the one to pull the motor. We have a full shop with lifts and air wrenches and everything so its not going to be for lack of equipment. However noone in...

What would be the pros of going with a 1.5JZ over a full on 2JZ? Considering that this engine would be going into an A70 chasis. I should have no problem getting ahold of a 2JZ block and crank and would need to make the choice between grabbing a 2JZGTE head and slowly building up a full on...

I was watching Top Gear videos on Youtube. When the Enzo(F60) one came up I noticed that the transmission shifts were accompanied by stiffening of the rear suspension to prevent dipping under load, keeping the car stable under hard acceleration. So I am thinking TEMS cars have suspension that...

I had been having a miss under hard acceleration so I changed the gap on my plugs from 31 to 28. The miss was gone. While I was at it I shimmed my wastegate about 3mm. On my test drive I gradually allowed the engine time to heat up then punched it in a straight away from about 30. The car...

I went out for a ride last night and got on the gas twice, the first time the turbo spooled up fine, then at about 7 psi it shuttered hard once or twice, after that it went straight up to 11 psi or so. I had a shimmed turbo so that seemed normal. It had no boost cut at the higher levels of...

I shimmed my wastegate with 2 washers for each bolt. It has a divorced down pipe so it is reaching 10-11psi. The boost guage reads about 7 psi under full throttle then a hard bump almost a stutter then it jumps up to 10-11psi. I checked for codes and got a code 34. Will the shimming cause...

I looked on Supras.com and in the reference section here to no avail. I have either a 34 or a 43(wife was in the car says it is a 34, I saw a 4 then a 3 then a 4 so I don't know). I would like to have the list for further reference though.

So I am cleaning up the engine bay of my car and I find this loose ground wire. It is attached right in front of the coil packs. Heres a few pictures? If anyone has any idea where this connects I would greatly appreciate the information.

For the past few years I have been working on a new engine concept. Last fall I submitted it to BMW, Audi, Aston Martin, GM and a few others. All but BMW replied that I should have a patent before contacting them about putting it into production. The concept got passed through the first stage of...

Its an 89 White Package Turbo Targa Automatic So far it has had Block rebuilt with 6M crank and factory pistons, rings, rods ARP fasteners HKS MHG Port and Polished Head w/o Oversized Valves Full 3" exhaust with Divorced Downpipe and test pipe Intake converter for AFM to 3" with filter...

When I rev my car above 4-5k rpm it loses power for about half a second, then gains it again quickly, then loses it again and does this in rapid sucession. My wastegate is unshimmed and I am not running an aftermarket boost controller so my boost should be around 7-8psi as I am running a full 3"...

I am looking at getting a MAP ECU from a friend for a good price. It has the map for a 7M with 550cc injectors. I am only running stock 440s with a stock turbo with a 3"DDP and exhaust the head also has a mild port/polish job. If I bought this, wired it up and went ahead and removed the stock...

Is there a company in the US that makes or can order wide body fenders for a MKIII? I have looked on a lot of suppliers web sites to no avail. I have heard S2 has some but since some members here have tried to contact them with much difficulty. I am not looking for anything gawdy just...

Sorry this has taken so long. My name is Andrew Montgomery and I live in Northern Mississippi. I have owned a Supra since my 17th birthday. My first one was a MKIV NA Automatic Targa Top that Chris(Gixxer750) now has as we traded. My new Supra is an '89 White Package Turbo Automatic with pretty...

I have been looking for a while for the production numbers by color for MKIII Supras. I have found the production numbers and the colors available for each year but nothing more than that. Any help would be very appreciated.