Search results

Yea I got some poly bushings taking a chance with then, couldn't get a hold of ronniek in time, will do! Appreciate the advice! ATF=auto tranny fluid? Sent from my iPhone using Tapatalk

Up at Lexus today, replacing the steering rack(horrible leaks) and lines got the magnafine filter 😉, also doing some other goodies looks like I'll be needing ball joints as well sigh... Sent from my iPhone using Tapatalk

A-to-the-J no resistors are needed, straight drop in easy as hell, you'll need a LED flasher relay tho or the low voltage from the bulbs will make the blinkers blink fast since it thinks they're out. Also you'll need to do the bypass the tail light failure module. Janch I was going to do a...

I bought then off superbrightleds.com I just got the brightest ones, used cool white for the blinkers and reverse on the rear, there is a yellow plastic filter so they look really yellow, and then these for the stop/reverse I wanted the whole enclosure to light up as even as possible Sent...

I think the difference on the studs is 1157's offset and 1156's are even Sent from my iPhone using Tapatalk

I have white led in doors with clear covers I didn't like the red. I also have them in the dash may be able to take better pics tomorrow for you silvermk3 but I got aftermarket glow gauge faces so it doesn't light up the entire gauge. The flasher relay was also a PITA for me to remove. Here are...

Are there still plates available for purchase?

Agreed I did this not too long ago took maybe an 1 hr or so, but thats cuz my father works at lexus so we used the lift and a stand to hold up the motor. As mcammarn said the only downside is you gotta be really careful putting the pan back on otherwise the FIPG will smear and f everything up lol

Beautiful day in the DFW washed the baby and took the targa off, had a guy at a red light compliment my car ask what year it was and said you don't see em like that anymore! I got that all the time in my 67 chevelle never expected it for the supra :) Sent from my iPhone using Tapatalk

Really like your build man, seeing you engine run was awesome Sent from my iPhone using Tapatalk

Well I was planning on getting coilovers, is it not worth to delete TEMs? Would it be better to wait for the tokicos, mine would be a DD but I would like good handling I wouldnt mind spending money if its worth it. :bigthumb:

Thanks just bought a universal pipe and cut it for the right lenth and angle. I do altho the rubber is starting to look warn so maybe time to replace them. It wasnt rubbing on the stock at all not sure if its cuz this rad is more square than stock? its just a little rubbing on the passanger side...

Yea that's what I thought but I jacked up the car to make sure it set in right from the bottom Sent from my iPhone using Tapatalk

So I got my mishimoto installed and did the "burping" with the heater on, got it cleaned up noticed it sits just a little too high and the hood rubs on the left corner and rad cap. Anyone else have that problem? Sent from my iPhone using Tapatalk

Got my mishimoto installed and got other goodies in the mail ES bushings f+r borla muffler magnaflow cat poly rack bushings, new steering rack and used mirrors mine are cracking really bad Sent from my iPhone using Tapatalk

Im begining to notice haha, cant decide on a Mishimoto(lifetime waranty)$297 or a Godspeed(3yr warranty) $170. Both seemed to have same specs and read good things about both.

No I used Toyota red, previous owner had regular coolant in it. Read on here that was bad so flushed that right when I got it, by the time I took the pic most of the coolant was on the floor, I had washed the red coolant off. I know I wasn't low on fluid for it to over heat either cuz I had...

It decided to snow in TX this morning, let my car warm up before leaving to work. Went out side to get ready to leave and was greeted by a loud pop/hiss got in my car to turn it off the temp gauges was way past the H and was going down fast, popped the hood expecting a blown house and found...

That's what I ended up doing but I have a dual amp set up and my wiring is a little crazy right now(got impatient lol) maybe after I clean it up I can get rid of the isolators they're ugly, that's badass may steal this lol thanks for the pic! Sent from my iPhone using Tapatalk

I ended up having to get ground loop isolaters had alternator whine on my speakers sigh, how did you run your power cable and rcas? Btw clean amp install probably gonna clean mine up now that I see yours. Also can't see clearly but did you use circuit breakers instead of a ANL fuse?