Search results

:(... Not what I or anyone wants to hear but oh well.... I do remember the rivets but never made anything out of it. Not sure the rivet would cause this anyways but I guess its just my luck the hg did not seal. In this case would it be a bad idea to still drive the car as long as no coolent gets...

Well the prestone flush kit plugs in the water hose to the heater core hose, Judging from the flush adapter on the hose it spits water out with great pressure rinsing out the whole system.... After a while the car is turned on to also clean the heater core. I flushed it out for about 30min and...

I hope and pray its the turbo and not the hg, could blown seals actually cause this mixture thou?... On a bright note, this turbo has been thru alot of overheating since before we removed the engine we found out it was leaking oil from both the banjo and the oil line to the block.... I think I...

Ah Tire Shredder, thanks for the advice but I have used about 7 of those prestone flush/cleaners lol..... It was the 1st thing I did... Reason I have not used actual coolent is becuase its the first thing used and came out nasty, I want to make sure the coolant comes out clean before spending...

Ah, oops hehe... Missread the cap part. I am talking about the radiator cap Not the oil cap. Sorry to scare ya Derek lol...

When I remove the cap there is a white pudding like stuff on it..... And yeah it is quite strange..... I did the flushes myself with a flush kit.... I was able to get all that crap out once but it returned a day later..... One theory is my turbo? could it possibly be mixing oil with water...

Hey guys, about two months ago I finally dropped in my fresh rebuilt block... A block done by one of the best shops here in the Houston area. Long story short, the block was a pretty solid build with alot of new goodies including a metal head gasket by cometic/titan motorsports. Ever since thou...

1st of all man.... Your "system" aint that great.... The $hit you smell proves it..... You didnt even wire the subwoofers right...... So please stop acting like you have the most amazing bang this world has ever seen...... 2nd..... You seem to be hurt at the world, did you get made fun of...

I just rebuilt my 7M, let me shoot out prices and what I did.... As for the machine work itself I payed 1800 bucks... I used the same crank (but polished) and same rods ( but reconditioned) with aftermarket but same quality as stock pistons 20 over..... I got a great deal from driftmotion on...

Ha, we spilled most of the tranny oil when removing it so I did try and put oil in there yesterday... but it did not work...... And yes it was all the way back, we put the tranny in parking before we hooked it up to the shift lever.... As for the connections, I will check that today.... I was...

Hey guys, this is day number two since I started my rebuilt engine and Thank God everything went well (with the engine).... I have a few vacum leaks somewere and basically just minor stuff keeping it from running smooth....The problem here is the transmission... Its an auto so I have to connect...

This is actually JDMMA70 helping Sside start his car. The car starts just has a somewhat minor fuel injector leak. However the transmission doesnt seem to move when put into gear. We tried neutral and tried to push the car but it didnt work. Does anyone have an idea as to why this is happening...

Close to a year ago I landed a 1990 Toyota Supra, a car I knew nothing about. "Supra", a familiar sound but no image crossed my mind of it. Prior to driving an hour to see the car I mentioned it to a friend... I asked him for his opinion on the Supra and what he said sounded great to me..." All...

Thing is that if you want any bass from the rear (speakers) what so ever then you are going to have to mess with the pods or make some yourself.... No way around this. If what is desired is better sound quality then yes you will have to go with after market speakers prior to oem speakers. Mainly...

Sticky fixed, sorry I have not had the time to come back and look over thread.... Been really busy trying to put it everything toghether for my rebuild......

But if they do breed......

Damn, are you 100% sure its ready to be driven? Id be scared ass hell..

Hey guys, I ended up talking to the machine shop and thye said my block was never machined before... They took off 7 thousands.... I gave that number to JDM7 and he came up with my thickness being 2.0 mm. So now I need a 2.0 mm thick and 84 mm bore. Closest gasket I can get within two weeks...

Nah, its more like..... Are those the new Jordans?? :icon_cool

Wht kind of shoes are you wearing?